Configure MR-T1ETH8 with the SJA1110 ECT GUI

[Daniel_W]

Hi!

Is it possible to build a firmware for the MR-T1ETH8 so that it could be configured from the SJA1110 ECT GUI?

Best regards

Daniel

[PavelL · Accepted solution]

Hello @Daniel_W ,

yes, that should be possible - MR-T1ETH8 has flash and 10-pin debug connector. ECT server needs to be added to your SJA1110's firmware. Since ECT is quite new tool, I would recommend contacting your assigned sales representative or field application engineer.

Best regards,

Pavel

[Daniel_W]

Ok, I'll contact our sales representative. Thanks for the help!
Best regards
Daniel