Currently I'm working on a project in which the NT3H1201 ic will be integrated in a flex printed circuit.
I'm looking for an off-the-shelf antenna design that suits the NT3H1201 ic. So Gerber and BOM
Size and Class are not an issue here
Solved! Go to Solution.
Hello,
Please download the application note AN11276 as the link. there is the more antenna design guide of the application note.
Hope it help you. Have a nice day.
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-----------------------------------------------------------------------------
Hello,
Please download the application note AN11276 as the link. there is the more antenna design guide of the application note.
Hope it help you. Have a nice day.
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-----------------------------------------------------------------------------