BFU550 MEXTRAM Model Parameters

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

BFU550 MEXTRAM Model Parameters

跳至解决方案
1,262 次查看
testa
Contributor I

Hello,

I'd like to get the mextram model parameters for the BFU550.  I do not have ADS and I don't think I can extract the model parameters from the binary files in the ADS library that I can download. I'm looking at trying out the built-in mextram 504.12.1 model in Xyce 6.7.  I've tried out the SPICE model that I can download off of your site, but I'd like to see if the mextram model more closely matches the plots in the datasheet (I-V curves, transition frequency, s-parameters, etc.)  Is there any way to get these parameters without needing ADS so I can try them out in this free tool?

Thank you,

Chris

0 项奖励
回复
1 解答
1,096 次查看
Daniel_Popa
NXP Employee
NXP Employee

Hi Chris,

Unfortunately, we can't address your request here. This community is dealing with MATLAB and Simulink related issues.

My advice is to fill a request for your topic here: Support|NXP

This way someone from technical support will route it to the appropriate team.

Thanks for your understanding.

Best regards,

Daniel

在原帖中查看解决方案

1 回复
1,097 次查看
Daniel_Popa
NXP Employee
NXP Employee

Hi Chris,

Unfortunately, we can't address your request here. This community is dealing with MATLAB and Simulink related issues.

My advice is to fill a request for your topic here: Support|NXP

This way someone from technical support will route it to the appropriate team.

Thanks for your understanding.

Best regards,

Daniel