Unable to see CAN1, CAN2 MBs(Message Buffers) on S32R294

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

Unable to see CAN1, CAN2 MBs(Message Buffers) on S32R294

709 次查看
njgl4f
Contributor I

I am working on the RRU2 (S32R294) Evaluation board and specifically on FLEXCAN.  I am able to see the CAN0 registers and buffers but unable to see the CAN1 and CAN2 buffers.  When I try to open it via Lauterbach I get the message, "Disabled in MC_ME".  MC_ME is in DRUN state. 

Any help would be great.  

标记 (1)
0 项奖励
2 回复数

574 次查看
rweiss
Contributor IV

Hi Paul,

did you check if CAN1/2 are shown as active in the MC_ME peripheral status registers?

Regards,

Reinhard

0 项奖励

574 次查看
njgl4f
Contributor I

Well someone in my organization sent me a new pers32s294.per file and I was able to see the buffers after that.  Thanks for checking back with me.  I appreciate it!

0 项奖励