Calypso 3M 0N84S JTAG problem

[neojung]

Hello Sir,

Yesterday, I received Calypso 3M 0N84S product, but I couldn’t attach through laughterbach.

According to the Calypso 6M 0N78S comparison, it’s JTAG ID has been changed, so I think also the Calypso 3M has been changed it’s JTAG ID.

Anyway, is this JTAG ID difference can make JTAG un-attachable?

If so, how can I fix it?

Best regards,

Neo

[matthiasnoack]

JTAG ID 0x0988501D is Calypso 3M. That chip is also supported already with PLS tools, if you need urgently some alternative you may contact them on www.pls-mc.com

[neojung]

Here is error log comes from Laughterbach.

debug hardware configuration error

JTAGID=0x0988501D

Processor with JTAGID 0x0988501D not supported by this debugger software version.

Get the latest software update from http://www.lauterbach.com/update.html and

try again. If the problem persists, contact support@lauterbach.com to request

a software update for your device.

debug hardware configuration error

debug hardware configuration error

JTAGID=0x0988501D

Processor with JTAGID 0x0988501D not supported by this debugger software version.

Get the latest software update from http://www.lauterbach.com/update.html and

try again. If the problem persists, contact support@lauterbach.com to request

a software update for your device.

debug hardware configuration error

debug port fail

JTAG error: tdo always zero

debug port fail

debug port fail

JTAGID=0xFFFFFFFF

JTAG error: tdo always zero

debug port fail

[petervlna]

Hi,

Do you have latest update from Lauterbach?

Here you can find updates:

LAUTERBACH DEVELOPMENT TOOLS 

Otherwise we must inform lauterbach.

Peter

[neojung]

Hello Peter,

Still it fails, maybe latest update from Lauterbach web doesn't support "JTAG ID = 0x0988501D"

Best regards,

Neo

[petervlna · Accepted solution]

Hi,

Yes this is possible.

You can contact Lauterbach support, and I will also notify them.

Peter