Calypso 3M 0N84S JTAG problem

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Calypso 3M 0N84S JTAG problem

Jump to solution
2,236 Views
neojung
NXP Employee
NXP Employee

Hello Sir,

 

Yesterday, I received Calypso 3M 0N84S product, but I couldn’t attach through laughterbach.

According to the Calypso 6M 0N78S comparison, it’s JTAG ID has been changed, so I think also the Calypso 3M has been changed it’s JTAG ID.

Anyway, is this JTAG ID difference can make JTAG un-attachable?

If so, how can I fix it?

 

Best regards,

Neo

Labels (1)
0 Kudos
1 Solution
1,775 Views
petervlna
NXP TechSupport
NXP TechSupport

Hi,

Yes this is possible.

You can contact Lauterbach support, and I will also notify them.

Peter

View solution in original post

0 Kudos
5 Replies
1,775 Views
matthiasnoack
Contributor II

JTAG ID 0x0988501D is Calypso 3M. That chip is also supported already with PLS tools, if you need urgently some alternative you may contact them on www.pls-mc.com

0 Kudos
1,775 Views
neojung
NXP Employee
NXP Employee

Here is error log comes from Laughterbach.

debug hardware configuration error

JTAGID=0x0988501D

Processor with JTAGID 0x0988501D not supported by this debugger software version.

Get the latest software update from http://www.lauterbach.com/update.html and

try again. If the problem persists, contact support@lauterbach.com to request

a software update for your device.

debug hardware configuration error

debug hardware configuration error

JTAGID=0x0988501D

Processor with JTAGID 0x0988501D not supported by this debugger software version.

Get the latest software update from http://www.lauterbach.com/update.html and

try again. If the problem persists, contact support@lauterbach.com to request

a software update for your device.

debug hardware configuration error

debug port fail

JTAG error: tdo always zero

debug port fail

debug port fail

JTAGID=0xFFFFFFFF

JTAG error: tdo always zero

debug port fail

0 Kudos
1,775 Views
petervlna
NXP TechSupport
NXP TechSupport

Hi,

Do you have latest update from Lauterbach?

Here you can find updates:

LAUTERBACH DEVELOPMENT TOOLS 

Otherwise we must inform lauterbach.

Peter

0 Kudos
1,775 Views
neojung
NXP Employee
NXP Employee

Hello Peter,

Still it fails, maybe latest update from Lauterbach web doesn't support "JTAG ID = 0x0988501D"

Best regards,

Neo

0 Kudos
1,776 Views
petervlna
NXP TechSupport
NXP TechSupport

Hi,

Yes this is possible.

You can contact Lauterbach support, and I will also notify them.

Peter

0 Kudos