Hi,
I am using TWR-LS1021A-PB evolution board and trying to use Flash Programmer which is part of CW Dev Studio(Version:10.0.7) to Flash the UBoot in NOR Flash Bank1 area of EV Board, but seems like Erase is working but not program.
I have chosen the "Flash File To Target" Option from Flash Programmer ikon and followed the steps according to the help provided by Freescale.
Pls see the Console output when i execute the Target Task.
/////////////////////////////////////////////////////////////////////////////////////////////////
fl::target -lc "LC for Simple Flash"
fl::target -b 0x10000000 0x20000
fl::target -v off -l off
cmdwin::fl::device -d "JS28F00AM29EWHA" -o "64Mx16x1" -a 0x60000000 0x67ffffff
cmdwin::fl::image -f "F:\\Debug\\u-boot\\u-boot.bin" -t "Auto Detect" -re on -r 0x60000000 0x67ffffff -oe on -o 0x4100000
cmdwin::fl::erase image
Beginning Operation ...
-------------------------
Auto-detection is successful.
File is of type Binary/Raw Format.
Image size is 0 bytes, nothing to erase.
Nothing to erase. No sectors selected
Performing target initialization ...
1570200 <m>0xFFFFFFFF</m> ....
Erase Command Succeeded.
cmdwin::fl::write
-------------------------
Using restricted address range 0x60000000 to 0x67FFFFFF
Programming file F:\Debug\u-boot\u-boot.bin
Auto-detection is successful.
File is of type Binary/Raw Format.
0 Bytes Programmed, Check Restricted Address Range
Program Command Succeeded
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Does anyone in the community tried this on the LS1021A Evo board?
I would really appreciate for any help to fix this issue.
Best Regards,
Nagi
已解决! 转到解答。