PLC55S69配置pripheras时遇到警告

[HuangJames]

Dear NXP：

gpio pin配置时，flexcomm0/1/2/3/7配置为uart；配置priphera时，提示警告“工具链/IDE工程不支持FLEXCOMM USART Driver版本。所需值: 2.4.0, 实际值: 2.5.1”；

选择之后，问题栏提示如下：

问题: 工具链/IDE工程不支持FLEXCOMM USART Driver版本。所需值: 2.4.0, 实际值: 2.5.1. 工程可能没有被正确编译。
级别: 警告
类型: 验证
工具: Toolchain/IDE project
来源: Peripherals
目标: Toolchain/IDE project: cm33_core0
资源: platform.drivers.flexcomm_usart

请问这个问题如何解决？谢谢！

[ZhangJennie]

Hi

What version of IDE do you use? I guess you are using very old version.

The error message indication your IDE version and SDK version don't match. I suggest you try the latest MCUXpresso IDE

https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/mcuxpresso-i...

and latest SDK 2.10.0

https://mcuxpresso.nxp.com/en/welcome

try again.

Have a nice day

Jun Zhang