怎样确定LPC5514JBD64的第一个引脚

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

怎样确定LPC5514JBD64的第一个引脚

Jump to solution
1,101 Views
thoomanwang
Contributor V

thoomanwang_0-1667557586976.png

thoomanwang_1-1667557636231.png

 

LPC5514JBD100封装有1pin标识,64pin的封装根本没有标识,文档中也无说明,只能猜或试???做个标记或在文档中说明一下很难吗?。

Tags (2)
0 Kudos
1 Solution
1,025 Views
ZhangJennie
NXP TechSupport
NXP TechSupport

I have requested document team to improve the doc.
I will keep you informed.

View solution in original post

0 Kudos
13 Replies
989 Views
amrishhpuri
Contributor I

I suspect that the chip used is not officially releasedI have encountered such a situation on the mk10 chip.

hellodear.in

teatv download

0 Kudos
1,083 Views
ZhangJennie
NXP TechSupport
NXP TechSupport

Hi thoomanwang,

Please see datasheet, page 8, 

https://www.nxp.com.cn/docs/en/nxp/data-sheets/LPC55S1x_LPC551x_DS.pdf

you will see

ZhangJennie_0-1667801910551.png

 

I don't have a LPC5514JBD64 in my hand now, but I just took a photo for LPC55S06JBD64, you will see pin 1 is labbled on the board. This is the same as LPC5514JBD64.

ZhangJennie_1-1667802067016.png

 

 

Thanks,

Jun Zhang

0 Kudos
1,075 Views
thoomanwang
Contributor V

thoomanwang_0-1667557586976.png

0 Kudos
1,072 Views
ZhangJennie
NXP TechSupport
NXP TechSupport

Please let me know if you bought the part from offical distributor? please let me know the contact.

0 Kudos
1,058 Views
thoomanwang
Contributor V

mouser

0 Kudos
999 Views
ZhangJennie
NXP TechSupport
NXP TechSupport

There is cosmetic change to product appearance, customer should receive product change update doc. CIN 2022020171I. If you don't get it, please check with mouser.

0 Kudos
1,052 Views
ZhangJennie
NXP TechSupport
NXP TechSupport

HI thoomanwang 

Thanks. Please refer my answer to use bottom left pin as first.

I will report it to doc team.

Thanks,

Jun Zhang

0 Kudos
1,033 Views
thoomanwang
Contributor V

I tried four directions and couldn't identify them correctly.

 

0 Kudos
1,015 Views
ZhangJennie
NXP TechSupport
NXP TechSupport

How many parts shows like your picture?

This is abnormal. We may check the distributor and factory.

0 Kudos
986 Views
thoomanwang
Contributor V

I bought 10 ps for development.

0 Kudos
991 Views
thoomanwang
Contributor V

I only used 2 parts

I suspect that the chip used is not officially releasedI have encountered such a situation on the mk10 chip.

 

thanks

0 Kudos
987 Views
ZhangJennie
NXP TechSupport
NXP TechSupport

If you buy the part from official distributor, they all official part. Please check the part with vendor.

0 Kudos
1,026 Views
ZhangJennie
NXP TechSupport
NXP TechSupport

I have requested document team to improve the doc.
I will keep you informed.

0 Kudos