USB as a host on mk64fn1m0vll12 for msd devices

[ksk10]

I am using mk64fn1m0vll12 controller on a custom hardware. 

I want to use the usb functionality as a host for msd devices . I am currently using KSDK v1.3 and processor expert for development. 

Kindly let me know how to go about the usb development. How can I integrate the USB stack in my project .

Regards,

Sanket

[fangli]

Hi,

There has a related thread here, please make reference. Hope it is helpful.

How to include USB Host MSD in KBOOT 

https://community.nxp.com/docs/DOC-331376 

[ksk10]

Hi,

I am using MK64FN1M0VLL12 and trying to get usb as host for mass storage device up and running.

I have a custom board and a crystal (external) of 25 Mhz. I am using Ksdk 1.3 and PE.

https://community.nxp.com/docs/DOC-331376 have gone through this and developed a usb project .

I have configured all the related clock setting as per the document described above.

But I cannot get the USB host to run , my device does not enumerate and its always in USB_DEVICE_IDLE state.

My project is same as one in the zip file given above.

Kindly guide me through this.

Regards,

Sanket