K70 LCD project

steverobinson · ‎07-02-2014

Hi, I am new to the Freescale architecture and am confused! I

wish to develop a K70-based product with a 3.5 LCD display. I

am unclear exactly what components I need to buy -

tower(model?), LCD panel(TWR-LCD?), processor with LCD

controller(TWR-K70F120M?), IDE, software libraries, etc.

Can anyone help, please?

LuisCasado · ‎07-02-2014

Hello Steve,

Hardware tools: TWR-K70F120M-KIT + TWR-LCD-RGB

Software Tools : You can use Codewarrior 10.6, IAR, KEIL, Atollic, …. And very soon KDS by Freescale

You can select between bare metal and RTOS, for example Freescale MQX. But also other RTOS (FreeRTOS, uCOSII, uTasker,…)

And for graphic solution : eGUI and PEG, both of them from Freescale also.

I hope this helps,

Luis

LuisCasado · ‎07-02-2014

Hello Steve,

Hardware tools: TWR-K70F120M-KIT + TWR-LCD-RGB

Software Tools : You can use Codewarrior 10.6, IAR, KEIL, Atollic, …. And very soon KDS by Freescale

You can select between bare metal and RTOS, for example Freescale MQX. But also other RTOS (FreeRTOS, uCOSII, uTasker,…)

And for graphic solution : eGUI and PEG, both of them from Freescale also.

I hope this helps,

Luis

steverobinson · ‎07-02-2014

Luis

That's just the information I needed, thanks.

Wish me luck!

steve robinsonj