How to set up K8x and PN5180 in NFC TAG mode

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to set up K8x and PN5180 in NFC TAG mode

Jump to solution
932 Views
deniscollis
Contributor V

Are there any Kinetis code examples and/or libraries for setting up a PN5180 NFC front end as a NTag device?

I've looked through the NXP NFC Reader Library NxpNfcRdLib examples on MCUXPresso, where I've found examples for reading NTags, but none for emulating one.

0 Kudos
1 Solution
830 Views
Kan_Li
NXP TechSupport
NXP TechSupport

Please refer to the following for details.

pastedImage_1.png


Have a great day,
Kan

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

View solution in original post

0 Kudos
2 Replies
831 Views
Kan_Li
NXP TechSupport
NXP TechSupport

Please refer to the following for details.

pastedImage_1.png


Have a great day,
Kan

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

0 Kudos
830 Views
deniscollis
Contributor V

Perfect, thanks Kan!

0 Kudos