download this demo software from nxp website and run it in NXP demoboard. it will run into Default_Handler(); what's the issue?
解決済! 解決策の投稿を見る。
Hi ping,
Please check whether below articles can solve the issue:
【经验分享】官方KEA EEPROM emulation 驱动CW工程补丁
【经验分享】官方KEA EEPROM emulation 驱动IAR工程补丁
Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------
Hi ping,
Please check whether below articles can solve the issue:
【经验分享】官方KEA EEPROM emulation 驱动CW工程补丁
【经验分享】官方KEA EEPROM emulation 驱动IAR工程补丁
Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------