EEPROM emulate driver for KEA128 and KEA8

[pingwang]

download this demo software from nxp website  and run it in NXP demoboard. it will run into Default_Handler(); what's the issue?

[Robin_Shen · Accepted solution]

Hi ping,

Please check whether below articles can solve the issue:

【经验分享】官方KEA EEPROM emulation 驱动CW工程补丁

【经验分享】官方KEA EEPROM emulation 驱动IAR工程补丁

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------