DSP56F803:

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

DSP56F803:

1,221 次查看
franzhofer
Contributor I

We are using this device since about 10 years. Now we get devices back from our customers where 2 bytes in the flash are no longer correct. Until now it is about 1 in 100 devices that shows this behaviour.Any ideas how bytes in flash can get erased ? The software in our devices has not been chnaged for years so we do not think that our software is the cause of this problem.

标签 (1)
0 项奖励
3 回复数

951 次查看
TICS_Fiona
NXP Employee
NXP Employee

Hello Franze

Could you please contact your distributor to request a quality incident? Thank you very much!

Best Regards

Fiona Kuang

TIC - Technical Information Center

0 项奖励

951 次查看
davidwahlander
Contributor I

We are in a similar situation; same device where certain units show memory corruption after an apparently random time in operation. Cells go from erased to programmed state, and some memory locations more often than others. We have seen it in Program Flash, Boot Flash and Data Flash areas.

0 项奖励

951 次查看
johnlwinters
NXP Employee
NXP Employee

David and Franz,

Do you have an FAE (Field Application Engineer) you can work with?

Also, any details about how the devices are programmed, and what conditions they are exposed to in use might be useful.

0 项奖励