Stack dump in sdk when create an attribute new from cluster basic

dangthanhnha_nt — Wed, 17 Jun 2020 04:07:08 GMT

Dear All,

I want create an attribute contain 100 byte data of cluster basic from router.

I user router is module chip jn5169, JN-AN-1217 sofware and sdk JN-SW-4170.

The step are described below:

1. I modify file basic.h in sdk:

a. I deifine attribute: example

#ifdef CLD_BAS_ATTR_DQ_STRING_DEVE

#define ATTR_DQ_STRING_DEVE 1

#else

#define ATTR_DQ_STRING_DEVE 0

#endif

b. I define in CLD_BASIC_NUMBER_OF_OPTIONAL_ATTRIBUTE

ATTR_SW_BUILD_ID + \

ATTR_DQ_TOUCH_CFG + \

ATTR_RP_GROUP_ENPOINT + \

ATTR_DQ_STRING_DEVE

c. I define "Basic Device Information attribute set attribute ID's":

E_CLD_BAS_ATTR_DQ_STRING_DEVE = 0xA003,

d. I define in struct BASIC_SERVER:

#ifdef CLD_BAS_ATTR_DQ_STRING_DEVE

tsZCL_OctetString sDQStringDeve;

uint8 au8DQStringDeve[100];

#endif

2. I modify basic.c in sdk:

a. I add define in #ifdef BASIC_SERVER

#ifdef CLD_BAS_ATTR_DQ_STRING_DEVE

{E_CLD_BAS_ATTR_DQ_STRING_DEVE, (E_ZCL_AF_RD|E_ZCL_AF_WR), E_ZCL_CSTRING, (uint3 2)(&((tsCLD_Basic*)(0))->sDQStringDeve),0},

#endif

b. I add define

#ifdef CLD_BAS_ATTR_DQ_STRING_DEVE

((tsCLD_Basic*)pvEndPointSharedStructPtr)>sDQStringDeve.u8MaxLength = sizeof(((tsCLD_Basic*)pvEndPointSharedStructPtr)->au8DQStringDeve);

((tsCLD_Basic*)pvEndPointSharedStructPtr)>sDQStringDeve.u8Length = 100;

((tsCLD_Basic*)pvEndPointSharedStructPtr)- >sDQStringDeve.pu8Data = ((tsCLD_Basic*)pvEndPointSharedStructPtr)->au8DQStringDeve;

#endif

3. I add Attribte cluster into file zcl_options.h

#define CLD_BAS_ATTR_DQ_STRING_DEVE

Question:

When I build and load file.bin into router is jn5169 it is error "Stack dump:"

File log_Stack_dump.txt is log error i print from uart after i config Enable all debug output.

Please let know the solution how to solve this error?

Thanks & Best Regards,

Nha Dang

Re: Stack dump in sdk when create an attribute new from cluster basic

mario_castaneda — Tue, 23 Jun 2020 00:22:54 GMT

Hi,

Is there any reason that you want to add this information tho the basic cluster?

You are getting a trap error caused by the b.trap instruction or the debug unit

You could create your own cluster, please look at the next community post.

ZigBee 3.0: Adding Clusters

Also, you could send a unicast taking as reference the next post https://community.nxp.com/message/1012968

Regards,

Mario

Re: Stack dump in sdk when create an attribute new from cluster basic

dangthanhnha_nt — Tue, 04 Aug 2020 06:28:54 GMT

Hi Mario,

In any case where the stack dump is encountered, is there any notification function before that?

And I can where is check the cause? (example: Ram, Eeprom is full).

Thanks & Best Regards,

Nha Dang

Re: Stack dump in sdk when create an attribute new from cluster basic

mario_castaneda — Tue, 04 Aug 2020 15:33:47 GMT

Hi Dang,

You could use the stack measure files.StackMeasure.c

vGetStackMeasure searches for the initialized value in the watermarked stack RAM area

For the EEPROM look at the app_pdm.c file

vDisplayPDMUsage()

Regards,

Mario

topic Re: Stack dump in sdk when create an attribute new from cluster basic in Wireless MCU

Stack dump in sdk when create an attribute new from cluster basic

Re: Stack dump in sdk when create an attribute new from cluster basic

Re: Stack dump in sdk when create an attribute new from cluster basic

Re: Stack dump in sdk when create an attribute new from cluster basic