Wireless MCUのトピックRe: K32W multilink download

K32W multilink download

danieltseng — Wed, 01 Jul 2020 10:13:05 GMT

Refer to UM11393 ch 2.9.2.

I can't find J1, but looking at the file J1 should refer to J2 usb interface

Using MCUXpresso IDE to burn K32W Carrier board via Multilink and SWD, the following error message will appear.

danieltseng — Mon, 06 Jul 2020 08:29:37 GMT

Using MCUXpresso IDE to burn K32W Carrier board via Multilink and SWD ？

mario_castaneda — Mon, 06 Jul 2020 15:51:59 GMT

Hi Daniel,

I hope you are doing great.

I have been programming the JN device using the SWD interface. Did you try to debug using the LPC?

Note: We are working with the Multilink. I will get back to you with some updates on this.

Regards,

Mario

danieltseng — Tue, 07 Jul 2020 02:55:26 GMT

I have tried using the LPC-link2 chip from J15 USB to SWD is OK.

mario_castaneda — Tue, 07 Jul 2020 17:03:16 GMT

Hi Daniel,

That is great. I am working on Multilink support.

I will get back to you in the other post.

Regards,

Mario

mario_castaneda — Mon, 13 Jul 2020 19:08:11 GMT

Hi Daniel,

Unfortunately, K32W is supporting the following probes:

Link2 debug probe with ARM’s CMSIS-DAP and SEGGER J-Link protocol options.

NXP open SDA J& link2:

Sorry for any inconvenience that this may cause you.

Regards,

Mario

danieltseng — Wed, 15 Jul 2020 03:16:07 GMT

Dear Mario,

Thank you for your response, currently resolved.

Daniel