Wireless MCUのトピックRe: K32W test tool

K32W test tool

danieltseng — Wed, 01 Jul 2020 01:41:44 GMT

I use "Test Tool 12.9.1.0" to test Multillink.

The following screen will be presented without k32w selection items

and the word of option may be overwritten on WIN10.

How do I choose to make K32W work properly?

Can I choose KW41z to download K32W image?

Or the function of K32W has not been released？

Re: K32W test tool

stephanie_m — Fri, 03 Jul 2020 23:03:46 GMT

Hello,

In the same document you are using as a reference you can find the chapter 4.2.1.4 Flash Programming of the QN9090, K32W061 or JN5189 Using FTDI port and JN518xProgrammer.exe .

It shows how the Test Tool supports through the Flash programmer the K32W.

Regards,

Estephania

Re: K32W test tool

danieltseng — Mon, 06 Jul 2020 06:56:21 GMT

Hi Estephania,

You may have misunderstood the question I want to ask.
I knew very early that it can be updated using FTDI port and JN518xProgrammer.exe.

The following screen will be presented without k32w selection items on WIN10.
What I want to know is whether Firmware Loader of Test Tool via Multilink and SWD slot can be used on K32W ?

Re: K32W test tool

stephanie_m — Fri, 10 Jul 2020 00:16:04 GMT

Hello,

Currently the support is limited to the description in the application note.

If there is any change or update, we'll post it here.

Sorry for the inconveniences this might cause you.

Regards ,
Estephania