topic Re: zigbee communication in Wireless MCU

zigbee communication

syed_idris — Tue, 02 Feb 2016 11:32:32 GMT

Hi all,

We are currently working on Kinetis KW40, as zigbee in already there in this microccontroller.

1.How to make zigbee communication of this controller with another zigbee module?

2.Where (in which register) the recieved data of zigbee is stored?

Thanks,

Syed_Idris

Re: zigbee communication

EarlOrlando — Wed, 03 Feb 2016 02:20:45 GMT

Hello,

The BeeStack (NXP's ZigBee Stack) is a full software stack which enables all the ZigBee protocol in the Kinetis devices. Unfortunately, The KW40Z devices are not supported in the latest BeeStack 5.0.0 codebase. This release supports the KL4xZ + MCR20A transceiver, K6xF + MCR20A transceiver and MKW2xD MCUS.

The MKW40Z Connectivity Software supports this device and it includes the SMAC, MAC and BLE stacks.

Also, if you have two MK2xD boards I recommend you to run this guide to get started with our BeeStack.

Running a demo with BeeKit (802.15.4 MAC, SMAC and ZigBee BeeStack)

Best regards,

Earl.

Re: zigbee communication

syed_idris — Wed, 03 Feb 2016 06:41:25 GMT

We are having USB-KW40 and programming it through KDS 3.0.0 (without OpenSDA)

We want to know how the zigbee of this KW40 will communicate to another zigbee module (which is separate).

which component should we select from component library of KDS 3.0.0 If we want

- to establish a communication ,

- to send/receive the data packets

- to know the indication (acknowledgment) of sent/received data packet,

what steps you recommend us to take?

Syed_Idris

Re: zigbee communication

EarlOrlando — Wed, 03 Feb 2016 17:43:54 GMT

Hello,

As I said, this MCU is not still supported for the BeeStack (NXP's ZigBee Stack). If you HAVE to use ZigBee you need to move to other MCU as I said in my last answer. The MKW40Z is only supported by SMAC, MAC (802.15.4) and BLE stacks.

Depending on your requirements I can recommend you one of those stacks to start developing.

The stacks I mention are included in the KW40Z Connectivity Software which is only supported by IAR. If you want to use KDS and the Kinetis SDK you must build your own application (as any other MCU). I don't recommend this option.

Best regards,

Earl.

Re: zigbee communication

EarlOrlando — Thu, 04 Feb 2016 20:02:36 GMT

Hello,

Maybe this message is useful for you:

Re: Router example for KW40Z/KW20Z

Earl.

Re: zigbee communication

rafaeltoledo — Mon, 09 May 2016 18:58:44 GMT

Is there any plans to support the Bluetooth stack by using the KDS and KSDK?