topic Re: use COM TOOLS to debug control-bridge project in Wireless MCU

use COM TOOLS to debug control-bridge project

18916628579 — Mon, 26 Aug 2019 16:34:46 GMT

Use FRDM-KW41 board debug ZigBee-3-0-ControlBridge project. NXP Test Tool 12/ZGWUI will work well,

But I want to use COM TOOLS to debug ,The output is garbled/ with 115200（see the attachment）. so if I want to use COM TOOLS to debug ,where need set in project frdmkw41z_wireless_examples_zigbee_3_0_control_bridge_freertos.

thanks

Re: use COM TOOLS to debug control-bridge project

mario_castaneda — Tue, 27 Aug 2019 01:55:06 GMT

Hi Liu,

Please look at the Application NoteZigBee 3.0 IoT Control Bridge.

"SDK_SDK_2.2_FRDM-KW41Z\docs\wireless\Zigbee\Application Notes\AN12063-MKW41Z-AN-ZigBee-3-0-ControlBridge.pdf".

Appendix A: Serial Protocol

Please let me know if you have issues with the commands.

Regards,

Mario

Re: use COM TOOLS to debug control-bridge project

18916628579 — Tue, 27 Aug 2019 14:42:15 GMT

hi mario：

thanks

jim