topic Re:  Q9080 How to do active BLE scanning in Wireless MCU https://community.nxp.com/t5/Wireless-MCU/Q9080-How-to-do-active-BLE-scanning/m-p/967620#M7991 <HTML><HEAD></HEAD><BODY><P>Both of my issues were caused by corrupted nvds flash.</P></BODY></HTML> Mon, 28 Oct 2019 12:36:25 GMT brian_dodge 2019-10-28T12:36:25Z Q9080 How to do active BLE scanning https://community.nxp.com/t5/Wireless-MCU/Q9080-How-to-do-active-BLE-scanning/m-p/967618#M7989 <HTML><HEAD></HEAD><BODY><P>The GAP_StartScanning call takes a parameter structure, where type can be gScanTypePassive_c or gScanTypeActive_c. If I set the type to gScanTypeActive_c the call returns an error 0x112.&nbsp; Is this not the proper way to put a scan request in?</P></BODY></HTML> Thu, 24 Oct 2019 18:57:20 GMT https://community.nxp.com/t5/Wireless-MCU/Q9080-How-to-do-active-BLE-scanning/m-p/967618#M7989 brian_dodge 2019-10-24T18:57:20Z Re: Q9080 How to do active BLE scanning https://community.nxp.com/t5/Wireless-MCU/Q9080-How-to-do-active-BLE-scanning/m-p/967619#M7990 <HTML><HEAD></HEAD><BODY><P>It should be possible to do active scan like this.</P><P>0x112 = gHciInvalidHciCommandParameters_c</P><P>It is possible that other parameters are invalid. Could you post all your scan related parameters?</P></BODY></HTML> Mon, 28 Oct 2019 03:12:05 GMT https://community.nxp.com/t5/Wireless-MCU/Q9080-How-to-do-active-BLE-scanning/m-p/967619#M7990 Xiang_Li 2019-10-28T03:12:05Z Re:  Q9080 How to do active BLE scanning https://community.nxp.com/t5/Wireless-MCU/Q9080-How-to-do-active-BLE-scanning/m-p/967620#M7991 <HTML><HEAD></HEAD><BODY><P>Both of my issues were caused by corrupted nvds flash.</P></BODY></HTML> Mon, 28 Oct 2019 12:36:25 GMT https://community.nxp.com/t5/Wireless-MCU/Q9080-How-to-do-active-BLE-scanning/m-p/967620#M7991 brian_dodge 2019-10-28T12:36:25Z