topic Disable NTAG in router application JN-AN-1217 in Wireless MCU

Disable NTAG in router application JN-AN-1217

jonw1 — Fri, 06 Sep 2019 16:10:36 GMT

I am setting the following in the Router application Makefile
APP_NTAG_ICODE ?= 0

APP_NTAG_AES ?= 0

I am still getting undefined references when attempting to build. What am I missing here?

```
ccHTwPbi.ltrans0.o:(.text+0x1e0): undefined reference to `APP_cbNtagTimer'
ccHTwPbi.ltrans0.o:(.text+0x1401): undefined reference to `APP_bNtagPdmLoad'
ccHTwPbi.ltrans0.o:(.text+0x1401): relocation truncated to fit: R_BA_18_PCREL against undefined symbol `APP_bNtagPdmLoad'
ccHTwPbi.ltrans0.o:(.text+0x14a5): undefined reference to `APP_vNtagStart'
ccHTwPbi.ltrans0.o:(.text+0x14a5): relocation truncated to fit: R_BA_18_PCREL against undefined symbol `APP_vNtagStart'
C:\Users\jonw\AppData\Local\Temp\ccHTwPbi.ltrans26.ltrans.o: In function `bdb_taskBDB':
ccHTwPbi.ltrans26.o:(.text+0xaea): undefined reference to `BDB_vOutOfBandCommissionHandleEvent'
ccHTwPbi.ltrans26.o:(.text+0xaea): relocation truncated to fit: R_BA_18_PCREL against undefined symbol `BDB_vOutOfBandCommissionHandleEvent'
C:\Users\jonw\AppData\Local\Temp\ccHTwPbi.ltrans30.ltrans.o: In function `APP_vBdbCallback':
ccHTwPbi.ltrans30.o:(.text+0x87): undefined reference to `APP_vNtagStart'
ccHTwPbi.ltrans30.o:(.text+0x87): relocation truncated to fit: R_BA_18_PCREL against undefined symbol `APP_vNtagStart'
collect2.exe: error: ld returned 1 exit status
make: *** [/c/NXP/bstudio_nxp/workspace/JN-AN-1217-Zigbee-3-0-Base-Device/Router/Build/Router_JN5169_DR1175.elf] Error 1
```

Re: Disable NTAG in router application JN-AN-1217

Sebastian_Del_Rio — Fri, 06 Sep 2019 17:27:26 GMT

Hi Jonathan, I hope you're doing well!

I changed the definitions in the make file like so:

# NFC NTAG ICODE (new) functionality
APP_NTAG_ICODE ?= 0
ifeq ($(APP_NTAG_ICODE), 1)
CFLAGS  += -DAPP_NTAG_ICODE
endif
 
# NFC NTAG AES (old) functionality
APP_NTAG_AES ?= 0
ifeq ($(APP_NTAG_AES), 1)
CFLAGS  += -DAPP_NTAG_AES
endif‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍

Did a cleanup of the project and was able to build the project for the router successfully.

I'm using version 1005 (14-Apr-2016 release) of the JN-AN-1217 to run the test.

Could you please try that?

Please let me know if you keep having issues.

Best regards,

Sebastian

Re: Disable NTAG in router application JN-AN-1217

jonw1 — Thu, 12 Sep 2019 21:13:06 GMT

I cleaned the project and then it built. Thanks for your response.