Wireless MCUのトピックRe: Enable Hight Power on JN5169

Enable Hight Power on JN5169

minhtan_uet — Tue, 03 Sep 2019 08:47:27 GMT

Hi support team!

Relate to:
How to enable High Power on JenNet-IP w/ JN5168-001-M05/6?
Enabling High power on Jn5168-001-M05 | Zigbee 3.0

How to config JN5169 + SE2431 PA ?

Now I'm working with JN5169 module have SE2431 PA. As i know JN5169-001-M06-2 support hight Power and connect with SE2431 PA on pin 12,13
So. For enable Hight Power I have change something in JN-AN-1216 ControlBridge

=>> Build error:

Please help confirm
- Can you give advice for enable hight power?
- How to fix build error?
Thanks you so much!

Re: Enable Hight Power on JN5169

minhtan_uet — Wed, 04 Sep 2019 08:49:44 GMT

I have added to app_start.c
vAppApiSetComplianceLimits(0, -10, 81);
vAHI_HighPowerModuleEnable(TRUE, TRUE);
But I don't see anything change on Ubiqua

Can you make me clearly!

Re: Enable Hight Power on JN5169

377086561 — Wed, 04 Sep 2019 11:49:55 GMT

I have the same doubts

Re: Enable Hight Power on JN5169

mario_castaneda — Wed, 04 Sep 2019 20:59:36 GMT

Hi Tram,

- Can you give advice to enable hight power?

Please look at the DR1191_JN5168_HP_uFL_M06_Module_1V0 folder, included in the JN-RD-6038 Lite. You could take as reference the schematic file.

Support Resources for JN516x MCUs

- How to fix the build error?

Please add the next line in the makefile.

APPSRC += AHI_ModuleConfiguration.c‍

Regards,

Mario

Re: Enable Hight Power on JN5169

minhtan_uet — Thu, 05 Sep 2019 02:58:29 GMT

Thank for your help!

Now I use Ubiqua for test Signal strength. Use 2 module NonPA and HavePA

JN5169 USB Dongle ubiqua capture RSSI seems like incorrect?

Maybe RSSI value is wrong! The value decreases with time.

Can you help me? :smileygrin:

Re: Enable Hight Power on JN5169

377086561 — Thu, 05 Sep 2019 03:35:37 GMT

Hi Tram & Mario，

Can you use it now? I use JN5169-001-M06-2, but the distance sent is only 5 meters.
I want to reach the maximum power and distance. Do you know how to do it?
How is this transmission power and distance calculated?

Re: Enable Hight Power on JN5169

mario_castaneda — Fri, 06 Sep 2019 15:55:18 GMT

Hi Tran,

The way that you are using is not the best way to measure dBm. However, it could give you an idea, but you could have a lot of variables and the RSSI could be stable.

By default, the JN devices have set the high power.

Regards,

Mario