topic Re: Where I can get JN51xx Flash Programmer GUI version? in Wireless MCU

Where I can get JN51xx Flash Programmer GUI version?

hckang70 — Sat, 31 Aug 2019 05:08:25 GMT

I downlaod and installed JN51xx Flash Programmer from the link https://www.nxp.com/downloads/en/software-support/JN-SW-4107.zip.

But I I cannot find the JN51xx Flash Programmer GUI version.

It was installed only some files like this, but I cannot go through like as User's Guide process.

I think it may be a part of the Frash Programmer Software.

Where can I get whole version of the software.

Re: Where I can get JN51xx Flash Programmer GUI version?

stephanie_m — Mon, 02 Sep 2019 19:59:31 GMT

Hello,

The JN-SW-4107, Production flash programmer user interface is no longer supported, you will need to run the available files through the command line

Sorry for the inconveniences this might cause you.

Regards,
Estephania

Re: Where I can get JN51xx Flash Programmer GUI version?

jonw1 — Wed, 04 Sep 2019 20:01:27 GMT

Where did you find this link:
https://www.nxp.com/downloads/en/software-support/JN-SW-4107.zip

I have been searching for this utility for a day. I found source for the flash programmer and instructions on how to build it (which were unsuccessful) and came to the forum as a last resort. Not sure if there is some magic page that gives you development resources, but in my opinion the NXP website is impossible to navigate.

Re: Where I can get JN51xx Flash Programmer GUI version?

stephanie_m — Thu, 05 Sep 2019 02:27:27 GMT

Hello,

Thank you for the feedback about the web page, somehting that can be useful for you in case you are working with the JN516x it's this web page :

Support Resources for JN516x MCUs | NXP

There you will find most of the links with the information of that family.

Hope it help you !