topic Re: Capacitive Sense in QN9080 in Wireless MCU

Capacitive Sense in QN9080

cicerodomingosj — Fri, 30 Aug 2019 15:34:28 GMT

Hello everybody,

I need an application example that uses QN9080 with capacitive sense.

I took a look at SKD and found nothing about it.

Thanks in advance,

Cicero

Re: Capacitive Sense in QN9080

stephanie_m — Fri, 30 Aug 2019 22:05:14 GMT

Hello,

The only information available for that it's the following application guide

Could you please check it and verify if that works for your needs?

Regards,

Estephania

Re: Capacitive Sense in QN9080

cicerodomingosj — Fri, 30 Aug 2019 23:25:25 GMT

Hello Estephania, thanks again.

I have already read these application notes. The problem is that the QN9080 SDK has no touch library. As mentioned in AN12190, there is an NXP touch library, but I didn't find it.

I need an example of how to integrate this functionality into a QN9080-based wireless application.

Thanks in advance,

Cicero

Re: Capacitive Sense in QN9080

stephanie_m — Mon, 02 Sep 2019 20:49:09 GMT

Hello,

Are you looking for all the files ? Or for some in specific?

Regards ,

Estephania

Re: Capacitive Sense in QN9080

cicerodomingosj — Mon, 02 Sep 2019 22:42:43 GMT

Hello Estephania,

Thanks so much for the file.

Those files you sent me are just the drives. The Touch library contains other files for the QN9080 solution.

I downloaded the MKE15Z256 SDK. Inside this SDK I found in the middleware folder the NXP Touch library. There are several other files needed to support the QN9080 touch feature.

So I need the complete and configured NXP Touch library for the QN9080. Can you help me ?

Thanks in advance.

Cícero Domingos Junior

VectorWork Automação Industrial

+55 41 99665-6375

cd.jr@hotmail.com

cicero@vectorwork.com.br

Re: Capacitive Sense in QN9080

cicerodomingosj — Mon, 02 Sep 2019 22:44:52 GMT

Hello Estephania,

Thanks so much for the file.

Those files you sent me are just the TSI drives. The Touch library contains other files for the QN9080 solution.

I downloaded the MKE15Z256 SDK. Inside this SDK I found the NXP Touch library in the middleware folder. There are several other files needed to support the QN9080 touch feature.

So I need the complete and configured NXP Touch library for the QN9080. Can you help me?

Thanks in advance.

Re: Capacitive Sense in QN9080

stephanie_m — Mon, 02 Sep 2019 23:48:20 GMT

Hello,

Not sure those files are available to share anymore, I'll verify in case those are.

Regards,

Etsephania