Wireless MCU中的主题 Re: JN5169 - ZBPro Stack - Reading data from end device using Coordinator.

JN5169 - ZBPro Stack - Reading data from end device using Coordinator.

matthew3 — Tue, 02 Jul 2019 10:58:37 GMT

Hi all

I am reading a value from a potentiometer through one of the ADC channels on the JN5169 for testing purposes. The potentiometer will be replaced with a sensor when i have the program doing what i need to do with it. I am wanting to packet this value up and be able to read it from the coordinator which in turn will save this to a MySQL DB.

I am struggling on finding where to place my code. I am using the JN-AN-1229-ZigbeePro-Application-Template files.

Any help is much appreciated.

regards

Matthew

Re: JN5169 - ZBPro Stack - Reading data from end device using Coordinator.

Sebastian_Del_Rio — Tue, 02 Jul 2019 17:49:03 GMT

Hi Matthew, I hope you're doing well!

To get an idea of how to implement a sensor or a voltage measurement, you could check the JN-AN-1220 Sensors application note. It shows the creation of the clusters and endpoints required, as well as the implementation of the report to send the information to a coordinator.

This example shows a few different implementations, so it should be helpful to get an idea.

Zigbee 3.0 Application Note software.

Please let me know if you have any further questions.

Best regards,

Sebastian