Wireless MCU中的主题 Re: How to store network data between resets https://community.nxp.com/t5/Wireless-MCU/How-to-store-network-data-between-resets/m-p/920688#M6949 <HTML><HEAD></HEAD><BODY><P>Hello, </P><P></P><P>You can try using the NVM_Interface APIs in your debug, could you please check them an verify if those are helpful for you ?</P><P></P><P>Regards, <BR />Estephania</P></BODY></HTML> Tue, 16 Jul 2019 16:46:38 GMT stephanie_m 2019-07-16T16:46:38Z How to store network data between resets https://community.nxp.com/t5/Wireless-MCU/How-to-store-network-data-between-resets/m-p/920685#M6946 <HTML><HEAD></HEAD><BODY><P>Is it possible to store network data (PANID, channel, node information for coordinator, short address, PANID, channel for end devices) and allow the devices to resume communication after a network reset?</P><P></P><P>Thanks!&nbsp;</P></BODY></HTML> Mon, 15 Jul 2019 17:59:30 GMT https://community.nxp.com/t5/Wireless-MCU/How-to-store-network-data-between-resets/m-p/920685#M6946 odd_bikes 2019-07-15T17:59:30Z Re: How to store network data between resets https://community.nxp.com/t5/Wireless-MCU/How-to-store-network-data-between-resets/m-p/920686#M6947 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>Which protocol are you using ? Is it ZigBee? Thread? 802.15.4?</P><P></P><P>Regards,</P><P>Estephania</P></BODY></HTML> Mon, 15 Jul 2019 20:09:29 GMT https://community.nxp.com/t5/Wireless-MCU/How-to-store-network-data-between-resets/m-p/920686#M6947 stephanie_m 2019-07-15T20:09:29Z Re: How to store network data between resets https://community.nxp.com/t5/Wireless-MCU/How-to-store-network-data-between-resets/m-p/920687#M6948 <HTML><HEAD></HEAD><BODY><P>802.15.4</P><P></P><P>Thanks!</P></BODY></HTML> Mon, 15 Jul 2019 20:57:23 GMT https://community.nxp.com/t5/Wireless-MCU/How-to-store-network-data-between-resets/m-p/920687#M6948 odd_bikes 2019-07-15T20:57:23Z Re: How to store network data between resets https://community.nxp.com/t5/Wireless-MCU/How-to-store-network-data-between-resets/m-p/920688#M6949 <HTML><HEAD></HEAD><BODY><P>Hello, </P><P></P><P>You can try using the NVM_Interface APIs in your debug, could you please check them an verify if those are helpful for you ?</P><P></P><P>Regards, <BR />Estephania</P></BODY></HTML> Tue, 16 Jul 2019 16:46:38 GMT https://community.nxp.com/t5/Wireless-MCU/How-to-store-network-data-between-resets/m-p/920688#M6949 stephanie_m 2019-07-16T16:46:38Z Re: How to store network data between resets https://community.nxp.com/t5/Wireless-MCU/How-to-store-network-data-between-resets/m-p/920689#M6950 <HTML><HEAD></HEAD><BODY><P>Sorry, maybe I wasn't clear with my question. The problem is not storing the data between resets, but how to use the stored data to resume connection from the end device to the coordinator, without scanning for available networks again and going through the association process.</P><P></P><P>Thanks!</P></BODY></HTML> Fri, 25 Oct 2019 11:06:19 GMT https://community.nxp.com/t5/Wireless-MCU/How-to-store-network-data-between-resets/m-p/920689#M6950 odd_bikes 2019-10-25T11:06:19Z