How to send Coordinator data to SED

logum4 — Thu, 12 Sep 2019 07:10:22 GMT

Hello Sir,

I am using NXP JN5168-001-M00 module, application Note-JN-AN-1229-ZBPro-Application-Template-v1002.

I can send SED data to Coordinator. but i need to send coordinator data also to sed when sed's wakeup. Coordinator data received in SED some time only, that i mentioned below details.

1. power on SED device ( Initial time) - Data received success

PRIVATE void vHandleStackEvent(ZPS_tsAfEvent sStackEvent) ----------- app_coordinator.c

case ZPS_EVENT_APS_DATA_INDICATION:
{
DBG_vPrintf(TRACE_APP, "APP: vCheckStackEvent: ZPS_EVENT_AF_DATA_INDICATION\n");

PDUM_eAPduFreeAPduInstance(sStackEvent.uEvent.sApsDataIndEvent.hAPduInst);

APP_vSendPayload_Ucast(tempbuf,6,Clust_ID, Des_Address); ------- > coordinator data to sed function

}

2. After received SED's data, every time I am sending coordinator data to SED, i got success ack in coordinator but i never received that data in SED.

void APP_vtaskMyEndPoint (void) ----- app_endpoint.c

case ZPS_EVENT_APS_DATA_INDICATION:
{

u16bytesread = PDUM_u16APduInstanceReadNBO(sStackEvent.uEvent.sApsDataIndEvent.hAPduInst, 0, "bbbbbbbbbbbbbbbbbbbbbbbbbbb",&payload);

DBG_vPrintf(TRACE_TRUE, "Read: %d, DATA : %x \r\n", u16bytesread,u8TempPayload);
PDUM_eAPduFreeAPduInstance(sStackEvent.uEvent.sApsDataIndEvent.hAPduInst);

APP_vSendPayload_Ucast(tempbuf,6,Clust_ID, Des_Address); ------- > after received my sed data, i am sending coordinator data to sed function

}

Thanks & regards,

Logan

Re: How to send Coordinator data to SED

mario_castaneda — Thu, 26 Sep 2019 04:13:30 GMT

Hi Loganathan,

Did you try to send this data when you received the data request from the SED?

Could you please provide your sniffer log?

The SED device needs the Pending internal flag when the coordinator wants to send some data.

Regards,

Mario

Wireless MCU中的主题 How to send Coordinator data to SED

How to send Coordinator data to SED

Re: How to send Coordinator data to SED