topic Re: Different versions of the protocol stack device connection in Wireless MCU

Different versions of the protocol stack device connection

18341265598 — Tue, 28 May 2019 08:07:32 GMT

Hi everyone:

I have two different devices, coordinate and end device. coordinate is zigbee 3.0 base device application note and end device is zigbee HA demo's ColorDimmerSwitch，respectively as follow:

Now i want to establish link between coordinate and end device,but i failed.

Note:These two devices use different protocol stacks

Can you give me some tips or ideas? thank you!!!

Re: Different versions of the protocol stack device connection

Sebastian_Del_Rio — Tue, 28 May 2019 16:39:45 GMT

Hello Zhang, I hope you're doing well!

The Zigbee 3.0 stack and the Zigbee HA stack are compatible, so you should be able to work with a Zigbee 3.0 Base device and your HA end device.

The ColorDimmerSwitch device is acting as a commissioner of the light devices, so it can control them.

May I ask, what is your final application? If the ColorDimmerSwitch is not working out for you, I would recommend you to try with the ColorSceneController instead, included in the JN-AN-1219 application note.

Please let me know if you have any further questions.

Best regards,

Sebastian

Re: Different versions of the protocol stack device connection

18341265598 — Tue, 18 Jun 2019 01:31:39 GMT

Hi Sebastian,

As you said, the Zigbee 3.0 Base device works with HA end device well.

I just want to control an HA OnOff end device,now it works well.

Thanks you.