topic How to read endddvice's attribute value in Wireless MCU

How to read endddvice's attribute value

18341265598 — Fri, 10 May 2019 11:38:25 GMT

hello everyone:

The SDK I used is jn-sw-4168, and the Application Template I used is ZigBee PRO Application Template for JN516x (jn-an-1184). Now, at the coordinate end, send data to the enddevice end through ZPS_eAplAfUnicastAckDataReq interface,and receive data normally at the enddevice.But while reading enddevice's custom attribute data with eZCL_SendReadAttributesRequest interface did not return the data, and no generation E_ZCL_CBET_READ_INDIVIDUAL_ATTRIBUTE_RESPONSE or E_ZCL_CBET_READ_ATTRIBUTES_RESPONSE events

The function that reads the attribute data is (at coordinate) :

The services on the enddevice side are my own defined and register.

The log information at coordinator is :

the log information at enddevice is :

Could you please tell me what caused the failure of my above operation?

Where is the relevant demo code?

Attached is my code， thank you!

Re: How to read endddvice's attribute value

ovidiu_usturoi — Mon, 13 May 2019 13:48:35 GMT

Hi,

From your code seems that you added a custom cluster with Id = 0x1234. Is this cluster set accordingly on the remote device (like server or client functionality, endpoint ...)? Also a sniffer capture will be useful for this scenario.

My recommendation is to check the read attribute command for a common cluster (let say Basic Cluster = 0x0000) and if it is working for this, means that you have a problem in setting the new cluster on the remote device.

Regards,

Ovidiu

Re: How to read endddvice's attribute value

18341265598 — Tue, 14 May 2019 07:03:10 GMT

1. Do I need to perform service discovery operations before I can read and write attributes?

2. Any demo related to reading and writing?

Re: How to read endddvice's attribute value

18341265598 — Tue, 14 May 2019 07:17:53 GMT

This is my read attribute log （at coordinate）：

This is my read attribute log （at router）：

this is my code：

my sdk is JN-SW-4170，my app template is JN-AN-1217-Zigbee-3-0-Base-Device

thanks！！