Block data is not read correctly

eric_wanghao — Sat, 04 May 2019 10:26:36 GMT

Hello,

I have a question about RC663 when reading an ISO15693 card.The source program is shown in the attachment.

Block data returned is always 0x5a 0xf 0x0 0x20，whatever the block number is.I've been puzzled by this problem for a long time.Please read the source code in the attachment carefully and try to find out the corresponding reasons.

p.s.I use the NxpNfcRdLib to program.

Thanks a lot!

Re: Block data is not read correctly

Jonathan_Iglesias — Tue, 07 May 2019 15:57:31 GMT

Hope you are doing great, can you tell me which example are you using or if you are modifying an example in the library if that is the case which example you are using as base to your project.

I am checking with the 15693 example and it works fine. also which library version do you have.

Have a great day !

Jonathan

Wireless MCU中的主题 Block data is not read correctly

Block data is not read correctly

Re: Block data is not read correctly