Wireless MCUのトピックRe: JN5169 Unable to enter debugging status https://community.nxp.com/t5/Wireless-MCU/JN5169-Unable-to-enter-debugging-status/m-p/892344#M6427 <HTML><HEAD></HEAD><BODY><P><SPAN style="font-size: 15px;">Hi Anjy,</SPAN></P><P></P><P><SPAN style="font-size: 15px;">Did you install the JN-SW-4165 SDK? The </SPAN>debugger<SPAN style="font-size: 15px;"> is looking for </SPAN>exe<SPAN style="font-size: 15px;"> files that are included in this SDK.</SPAN></P><H1><SPAN style="font-size: 15px;"><A href="https://www.nxp.com/products/wireless/proprietary-ieee-802.15.4-based/jennet-ip:JENNET-IP?lang=en&amp;lang_cd=en&amp;">JenNet-IP</A></SPAN></H1><P><SPAN style="font-size: 15px;">Please look at the <A href="https://www.nxp.com/docs/en/application-note/JN-AN-1203.pdf">JN516x JTAG Debugging in BeyondStudio</A></SPAN></P><P></P><P><SPAN style="font-size: 15px;">Regards,</SPAN></P><P><SPAN style="font-size: 15px;">Mario</SPAN></P></BODY></HTML> Thu, 11 Apr 2019 17:09:18 GMT mario_castaneda 2019-04-11T17:09:18Z JN5169 Unable to enter debugging status https://community.nxp.com/t5/Wireless-MCU/JN5169-Unable-to-enter-debugging-status/m-p/892343#M6426 <HTML><HEAD></HEAD><BODY><P>When JTAG is used to debug JN5169, a DEBUG will give the following tips. What is the reason? JTAG tools adopt ST-LINK V2，Thank you!</P><P></P><P>Error with command: ba-elf-gdb.exe --version<BR />Cannot run program "ba-elf-gdb.exe": Launching failed</P></BODY></HTML> Thu, 11 Apr 2019 05:53:26 GMT https://community.nxp.com/t5/Wireless-MCU/JN5169-Unable-to-enter-debugging-status/m-p/892343#M6426 298487317 2019-04-11T05:53:26Z Re: JN5169 Unable to enter debugging status https://community.nxp.com/t5/Wireless-MCU/JN5169-Unable-to-enter-debugging-status/m-p/892344#M6427 <HTML><HEAD></HEAD><BODY><P><SPAN style="font-size: 15px;">Hi Anjy,</SPAN></P><P></P><P><SPAN style="font-size: 15px;">Did you install the JN-SW-4165 SDK? The </SPAN>debugger<SPAN style="font-size: 15px;"> is looking for </SPAN>exe<SPAN style="font-size: 15px;"> files that are included in this SDK.</SPAN></P><H1><SPAN style="font-size: 15px;"><A href="https://www.nxp.com/products/wireless/proprietary-ieee-802.15.4-based/jennet-ip:JENNET-IP?lang=en&amp;lang_cd=en&amp;">JenNet-IP</A></SPAN></H1><P><SPAN style="font-size: 15px;">Please look at the <A href="https://www.nxp.com/docs/en/application-note/JN-AN-1203.pdf">JN516x JTAG Debugging in BeyondStudio</A></SPAN></P><P></P><P><SPAN style="font-size: 15px;">Regards,</SPAN></P><P><SPAN style="font-size: 15px;">Mario</SPAN></P></BODY></HTML> Thu, 11 Apr 2019 17:09:18 GMT https://community.nxp.com/t5/Wireless-MCU/JN5169-Unable-to-enter-debugging-status/m-p/892344#M6427 mario_castaneda 2019-04-11T17:09:18Z