Wireless MCUのトピックRe: QN908x OTAP_Clinet_ATT won't work

QN908x OTAP_Clinet_ATT won't work

li-chinwang — Mon, 18 Mar 2019 06:37:56 GMT

Dear Sir

I can’t see NXP_OTAA in IOT Tool box after I follow API Guide based on newest QN9080 SDK.

Could you try it in your side and make sure if NXP_OTAA can show in the app?

Lee Wang

Re: QN908x OTAP_Clinet_ATT won't work

stephanie_m — Thu, 21 Mar 2019 18:58:16 GMT

Hello,

Just to make sure I fully understand you.

You used the OTA, flashed a new firmware, and you can't perform the OTA again? If you flashed a new firmware, I believe that was an example, do you see the example functionality in the application?

I mean, if you loaded a heart rate sensor, do you see it in the app?

Regards,

Estephania

Re: QN908x OTAP_Clinet_ATT won't work

rohitkpdj — Thu, 25 Jul 2019 14:04:16 GMT

i have the similar issue,In mine it is showing OTAL while sending the file,after that it will show transfer completed,and that code functionality is not visible .Can u guide me #estephania‌

Re: QN908x OTAP_Clinet_ATT won't work

krumita_pethani — Mon, 07 Oct 2019 10:34:29 GMT

which file u sending?,because in any code u need to creat otap service for example otap server or otap client code

Re: QN908x OTAP_Clinet_ATT won't work

krumita_pethani — Mon, 07 Oct 2019 10:37:42 GMT

hello, i test otap in qn9080 board,with client att code, after programing first time when i update using otap ,code uplode and work properly. but second time it not update it restart from 1% again and again

Re: QN908x OTAP_Clinet_ATT won't work

jasonchiang — Wed, 26 Feb 2020 06:55:17 GMT

You said "second time it not update it restart from 1% again and again". Could you make sure if you still see OTAP_Client_ATT after you performed 1st OTAP ? I think it already been flashed update by your application.

You need to integrate OPTA_Client_ATT with your application first, then perform OTAP. After that, you may can perform 2nd OTAP process.

Re: QN908x OTAP_Clinet_ATT won't work

aswinpraj_1989 — Thu, 27 Feb 2020 09:57:16 GMT

Hi Jason,

I'm in a process of developing a multiple otap capability application, Due to memory constraints it seems difficult for 3 image spaces in the flash memory. would you please ellaborate the sentence "integrate OPTA_Client_ATT with your application first". I just stuck in there ..lol

Thanks in Advance :smileyhappy:

Re: QN908x OTAP_Clinet_ATT won't work

jasonchiang — Sun, 01 Mar 2020 08:24:00 GMT

Simple to say : we haven't default code for the requirement of " performing 2nd OTAP ". What profile you used in your application ? You need to integrate OTAP_ATT_Client project file into your profile code for your application running 2nd OTAP. Hoping this explain it.

Re: QN908x OTAP_Clinet_ATT won't work

aswinpraj_1989 — Sun, 10 May 2020 10:22:51 GMT

Thanks Jason. I'm working on it.:)

Re: QN908x OTAP_Clinet_ATT won't work

aswinpraj_1989 — Wed, 03 Jun 2020 09:13:01 GMT

Hi Jason. Actually I figured out it without integrating the otap profile. Thanks for the Help :smileyhappy:

Re: QN908x OTAP_Clinet_ATT won't work

jasonchiang — Thu, 04 Jun 2020 03:16:36 GMT

Would you please share your idea ?

Re: QN908x OTAP_Clinet_ATT won't work

aswinpraj_1989 — Fri, 05 Jun 2020 10:10:18 GMT

Sure Jason. I'm preparing a blog post. I'll update the link to the page once i finished. :smileyhappy: