Wireless MCUのトピックRe: How recovery network?

How recovery network?

qidongli — Fri, 29 Mar 2019 01:40:00 GMT

While use JN-AN-1216-Zigbee-3-0-IoT-ControlBridge Project act to Coordinator node, I found a macro definition in the file as follows

#ifdef NETWORK_RECOVERY
#include "app_network_recovery.h"
#endif

If in file define NETWORK_RECOVERY macro, the compiler will prompt for an error, is remind not found "app_network_recovery.h" file, the "app_network_recovery.h" file in where can found. If I want to recovery network, what should I do ?

Re: How recovery network?

mario_castaneda — Mon, 01 Apr 2019 17:45:04 GMT

Hi,

Please define the NETWORK_RECOVERY=1 in the Makefile.

###############################################################################
# commands options
# enable optional commands as required per applicaion.

NETWORK_RECOVERY       = 1 
STACK_MEASURE          ?= 0
APP_AHI_CONTROL        ?= 1

###############################################################################‍‍‍‍‍‍‍‍‍

Regards,

Mario

Re: How recovery network?

qidongli — Mon, 08 Apr 2019 02:53:50 GMT

Hi,

When I try in Makefile define

NETWORK_RECOVERY       = 1

An error occurs at compile time, below:

c:/NXP/Application/JN-AN-1216-Zigbee-3-0-IoT-ControlBridge/Source/ZigbeeNodeControlBridge/app_Znc_cmds.c:64:34: fatal error: app_network_recovery.h: No such file or directory
compilation terminated.
make: *** [app_Znc_cmds.o] Error 1

This question need remove "app_network_recovery.h" file, Then recompile?

Regards,

Liqidong

Re: How recovery network?

patrick_pan — Sun, 28 Apr 2019 11:04:17 GMT

Hi, Li

Currently , network recovery feature is not officially released in AN1216.

Re: How recovery network?

nguyenanhgiau10 — Fri, 27 Dec 2019 05:26:14 GMT

Hi Mario,

Where do I can find app_network_recovery.c file?

Re: How recovery network?

mario_castaneda — Fri, 27 Dec 2019 17:58:56 GMT

Hi Giau,

Network recovery feature is not officially released in AN1216.

Mario