Wireless MCUのトピックRe: Zigbee 1229 has errors every time it is compiled

Zigbee 1229 has errors every time it is compiled

jun951753jun951 — Thu, 10 Jan 2019 01:44:40 GMT

I used the 1229 to extract the 1229 zip to C:\NXP\bstudio_nxp\workspace。

There were no problems after the first Bulid all.But if I delete the project and import BUlid all again here, a lot of errors will occur.What should I do?

befor first project ->Bulid all

after project ->Bulid all

If you delete a project and repeat the above operation, many errors will occur

project ->Bulid all

What should I do to be free from mistakes?

Re: Zigbee 1229 has errors every time it is compiled

mario_castaneda — Thu, 10 Jan 2019 18:27:28 GMT

Hi,

Please look at the next community post https://community.nxp.com/docs/DOC-340028

Regards,

Mario

Re: Zigbee 1229 has errors every time it is compiled

jun951753jun951 — Fri, 11 Jan 2019 08:13:21 GMT

Is the following picture normal after compilation?
But a lot of header files and variables, you can't see the definition.Will this affect future development?

Re: Zigbee 1229 has errors every time it is compiled

mario_castaneda — Fri, 11 Jan 2019 17:16:42 GMT

Hi Juan,

Is the following picture normal after compilation?

Yes, As you can see, you generated the AN1229_ZBP_Coordinator_JN5169.bin

But a lot of header files and variables, you can't see the definition. Will this affect future development?

No, you must take as reference the console log.

Regards,

Mario