Ultra Low Cost Zigbee Evaluation Board

Joshevelle — Mon, 20 Oct 2014 19:33:35 GMT

Hello All,

I designed a ultra low low cost evaluation board (ULC-Zigbee) based in Kinetis wireless MCUs, take a look at the attached PDF for the brief description. I was able to build three of them at ~$10USD each.

The ULC-Zigbee is covered under the GNU General Public License. The required files to build the board are attached, it measures 30 x 50mm.

My partner AngelC wrote a sample code. The software basically communicates wirelessly the ULC-Zigbee board with a USB-KW24D512. An FXOS8700 is externally connected through the prototype board connector and the magnetic and acceleration values are then wirelessly transmitted to the USB stick, then the values can be printed in a HyperTerminal.

The attached zip file contains the following files:

File name

Description

ULC-Zigbee-EBV_V10.pdf

Brief description of the ULC-Zigbee board

MKW2x_Eagle_library.lbr

Required EAGLE CADSOFT LIBRARY

ULC-Zigbee-EBV_V10.brd

EAGLE v6.5 Board

ULC-Zigbee-EBV_V10.sch

EAGLE v6.5 Schematic

ULC-Zigbee-EBV_V10_SCH.pdf

ULC-Zigbee board schematic

ULC-Zigbee-EBV_V10_BOM.xlsx

Bill of materials

ULC-Zigbee-EBV_V10_GERBER_FILES.zip

Gerber files

WirelessUART_MKW2x_v1.3_eCompass_TX_v1.zip

ULC-Zigbee board sample software

WirelessUART_MKW2x_v1.3_eCompass_RX_v1.zip

USB-KW24D512 sample software

Hope it helps!

-Josh

Original Attachment has been moved to: ULC-Zigbee-EBV.zip

Wireless MCUのトピックUltra Low Cost Zigbee Evaluation Board

Ultra Low Cost Zigbee Evaluation Board