topic Re: End device and Router device capacity is 2, which is not as per the Specification. in Wireless MCU

End device and Router device capacity is 2, which is not as per the Specification.

vihang_jani — Tue, 20 Feb 2018 12:30:18 GMT

Hi,

Sometimes I get End Device and router capacity is 2 in ZPS_EVENT_NWK_DISCOVERY_COMPLETE Pkt sometimes it can give proper value, have anyone know the reason of this issue?

As per Zigbee specification ( Document 053474r20)

Router Capacity

TYPE : Boolean
Valid Range : TRUE(1) or FALSE(0)

Description : This value is set to true if the device is capable of accepting join requests from router-capable devices and set to FALSE otherwise.

EndDeviceCapacity

TYPE : Boolean
Valid Range : TRUE(1) or FALSE(0)

Description : This value is set to true if the device is capable of accepting join requests from end devices and set to FALSE otherwise.

NOTE : I have attached log for your reference and am using JN-SW-4166 SDK.

Set Channel to 11

vSL_WriteMessage(32793, 1, 93)

Scan is over Channel
vEZ_ClearDiscNT done
vAttemptDiscovery :- Discovery API Status =0
EZ_STATE = 0
APP_ZpsEventTask sStackEvent.eType : 0x000a
ZPS_EVENT_NWK_DISCOVERY_COMPLETE

vSL_WriteMessage(32791, 63, 54)

******eNodeState : 0x02*****sStackEvent.eType : 0xa
eGetEZModeState = 3 , u8JoinAttempts = 1
ZPS_EVENT_NWK_DISCOVERY_COMPLETE......NWK Found, Count = 4
vEZ_SortAndSaveNetworks
***Saving Open NWK ExPANID = 0xdf964fec0a52d931
*vEZ_SortAndSaveNetworks sEZModeData.u8DiscoveredNwkCount = 1
u8DiscoveredNwkCount : 1
u8JoinIndex : 0
u64ExtPanId : 0xX
u8EndDeviceCapacity : 2
u8LogicalChan : 11
u8PermitJoining : 1
u8RouterCapacity : 2
u8StackProfile : 2
u8ZigBeeVersion : 2
Join Network API Success 0

vSL_WriteMessage(32800, 16, 1a)

Re: End device and Router device capacity is 2, which is not as per the Specification.

mario_castaneda — Wed, 21 Feb 2018 01:03:03 GMT

Hi Vihang,

I'm sorry. I could not find the Application note that you are referring to.

Could you please point me the link of the application note that you are mentioning?

Regards,

Mario

Re: End device and Router device capacity is 2, which is not as per the Specification.

vihang_jani — Wed, 21 Feb 2018 05:07:01 GMT

Application Note is JN-SW-4364-ZigBee-SmartEnergy1.x-v1721

Re: End device and Router device capacity is 2, which is not as per the Specification.

vihang_jani — Wed, 21 Feb 2018 05:15:00 GMT

Good Morning Mario,

I am using Application Note JN-SW-4364-ZigBee-SmartEnergy1.x-v1721 and JN-AN-1207-Smart-Energy-HAN-Solutions-Network-CoProcessor.

Re: End device and Router device capacity is 2, which is not as per the Specification.

vihang_jani — Wed, 21 Feb 2018 05:36:59 GMT

Hi Mario,

I am using JN-SW-4364-ZigBee-SmartEnergy1.x1721 and JN-AN-1207-Smart-Energy-HAN-Solutions-Network-CoProcessor

Re: End device and Router device capacity is 2, which is not as per the Specification.

vihang_jani — Wed, 21 Feb 2018 05:44:55 GMT

Hi Mario,

I am using JN-SW-4364-ZigBee-SmartEnergy1.x1721 and JN-AN-1207-Smart-Energy-HAN-Solutions-Network-CoProcessor

Re: End device and Router device capacity is 2, which is not as per the Specification.

mario_castaneda — Wed, 21 Feb 2018 19:02:56 GMT

Hi Vihang,

Could you please check the Zigbee SDK that we provide?

Support Resources for JN516x MCUs|NXP

Regards,

Mario