topic Re: How to confirm MAC-Layer ACK?(JN5169,JN-SW-4168) in Wireless MCU

How to confirm MAC-Layer ACK?(JN5169,JN-SW-4168)

teddyzheng — Mon, 22 Jan 2018 14:48:56 GMT

I send no-aps-ack package, like 'eCLD_IASZoneUpdateZoneStatus' (defined CLD_IASZONE_BOUND_TX_WITH_APS_ACK_DISABLED).

but i need get next-hop MAC-Layer ACK to confirm it's parent node is received this package.

i do not found any callback event in 'ZPS_teAfEventType'.

how to confirm MAC-Layer ACK?

Thanks!

Re: How to confirm MAC-Layer ACK?(JN5169,JN-SW-4168)

teddyzheng — Wed, 24 Jan 2018 08:35:56 GMT

Hello?

Can you give me some advice?

Re: How to confirm MAC-Layer ACK?(JN5169,JN-SW-4168)

mario_castaneda — Fri, 26 Jan 2018 00:47:39 GMT

Hi Teddy,

What are the Application note and the version that you are working on?

Regards,

Mario

Re: How to confirm MAC-Layer ACK?(JN5169,JN-SW-4168)

teddyzheng — Wed, 31 Jan 2018 15:40:20 GMT

Hi Mario,
Thanks for your reply!
sorry, I don't understand the mean of "Application note and the version"
My product is a battery sleepping device(a sensor), base on ZHA1.2 and JN-SW-4168v1620.
when it send a no-aps-ack command(like report, or IAS Status Change Notification, etc), it's parent node will response mac-layer ack, I want to check it. if no response, the sensor need do re-send command, or send beacon request to searching the new parent node.
but I don't known how to check mac-layer ack.

Re: How to confirm MAC-Layer ACK?(JN5169,JN-SW-4168)

mario_castaneda — Mon, 12 Feb 2018 21:14:22 GMT

Hi Teddy,

You are working on the Home Automation, so did you take as a reference an Application note ?

Regards,

Mario