topic How Router works in JN-AN-1229 Application Note in Wireless MCU

How Router works in JN-AN-1229 Application Note

dheerajsawant — Fri, 19 Jan 2018 12:31:11 GMT

Hello mario_castaneda‌,

I want to increase distance of JN5168 Module using Router.

But Don't Know From Where should i Start?

I am reading "Route Discovery" from PDF JN-UG-3113.

In Simple i want to achieve Mesh Network.

How it will be Possible?

Best Regards,

Dheeraj

Re: How Router works in JN-AN-1229 Application Note

dheerajsawant — Mon, 22 Jan 2018 06:26:07 GMT

Hello,

Does Anybody Know how mesh Topology possible in JN5168-001-M00 module.

i am using JN-AN-1229 Application Note.

i am successfully completed communication from Sleeping End Device to Coordinator.

Now i want to Increase distance using Router.

Any One know how it will Be possible?

Best Regards,

Dheeraj

Re: How Router works in JN-AN-1229 Application Note

dheerajsawant — Tue, 23 Jan 2018 05:24:51 GMT

Hello mario_castaneda‌,

Have you work on it?

because i am still looking for the solution.

Best Regards,

Dheeraj

Re: How Router works in JN-AN-1229 Application Note

dheerajsawant — Wed, 24 Jan 2018 05:39:03 GMT

Hello,

Any one know how to configure mesh network using zps configuration?

Best Regards,

Dheeraj

Re: How Router works in JN-AN-1229 Application Note

mario_castaneda — Wed, 14 Feb 2018 20:20:36 GMT

Hi Dheeraj

I think this thread is related to the question

https://community.nxp.com/thread/469295

Regards,

Mario

Re: How Router works in JN-AN-1229 Application Note

dheerajsawant — Thu, 15 Feb 2018 05:30:48 GMT

Yes mario_castaneda‌,

but i little bit understand about this thread,

how i do this?

open zps configuration in beyond studio.

create new sibling of router as sleeping end device.

as router create child(SED) , that child(SED) will connect to coordinator through router.

because of that communication range increase.

(i think my this problem is solved and looking for another thread which is "SENDING DATA FROM COORDINATOR TO SLEEPING END DEVICE".)

(if i am doing somewhere wrong please inform me.)

BEST Regards,

Dheeraj

Re: How Router works in JN-AN-1229 Application Note

mario_castaneda — Thu, 15 Feb 2018 18:54:11 GMT

Hi Dheeraj,

Yes, The router opens up the network for other devices to join, child(SED) will connect to coordinator through router

Regards,

Mario