Wireless MCUのトピックRe: QN902X hids example

QN902X hids example

sergioa — Thu, 14 Sep 2017 19:53:35 GMT

Hello i like to know how can i test hids example for qn9020.

Because the nxp qtool doesn't have HOGPD (HID Profile Device Role) client to test.

thanks in advance.

Re: QN902X hids example

gerardo_rodriguez — Tue, 26 Sep 2017 23:45:07 GMT

Hello Sergio,

You can use the "prj_client" demo appplication to test most of the BLE peripherals. In your case you need to enable the HID Host macros in "\prj_client\src\usr_config.h":

///HID Profile Report Host Role
 #define CFG_PRF_HOGPRH
 #define CFG_TASK_HOGPRH TASK_PRF1‍‍‍‍‍‍

Open a serial terminal @ 115200 bauds an go to through the menu to connect to the HID device and Enable the report Mode in the HOGH menu. Make sure that your terminal transmits New-lines as CR-LF ('\r''\n').

The HID device can also be connected to any Bluetooth Smart Ready products available on the market that supports HID devices.

Regards.

Re: QN902X hids example

chizou — Thu, 07 Dec 2017 09:43:15 GMT

I have test this example,but ,I dont see the report data of sending by hid_device. how can i see that?

Re: QN902X hids example

sergioa — Mon, 11 Dec 2017 13:37:24 GMT

Hello chi zou I see it with JTAG the example work fine.

Try to see the buffer of HID.

Regards.

Re: QN902X hids example

chizou — Wed, 20 Dec 2017 04:13:08 GMT

hello Gerardo Rodríguez ,

now i want use example of hids to make a Bluetooth Keyboard,but the example is a mouse .Can you provide an example of a keyboard。

I've been doing it for two weeks, but I can't do it. Now I need your help very much。