Wireless MCUのトピックADC coexistence with Connectivity Software (solved) https://community.nxp.com/t5/Wireless-MCU/ADC-coexistence-with-Connectivity-Software-solved/m-p/685598#M3217 <HTML><HEAD></HEAD><BODY><P>Problem solved. After debugging I found that Keyboard Module was enabled and was causing conflict&nbsp;with pin used by ADC.</P><P></P><P>Hi All,</P><P></P><P>I don't see ADC driver in Connectivity Software so I try to configure ADC from example located &nbsp;in \frdmkw41z\demo_apps\dac_adc folder.&nbsp;</P><P>I use&nbsp;ADC0_IRQHandler to obtain converted value. First conversion usually is OK, but second causes reset KW41Z.&nbsp;</P><P>How to properly handle adc irq?</P><P></P><P>Best Regads,</P><P>Lukasz</P></BODY></HTML> Thu, 27 Jul 2017 10:30:53 GMT lukaszgesieniec 2017-07-27T10:30:53Z ADC coexistence with Connectivity Software (solved) https://community.nxp.com/t5/Wireless-MCU/ADC-coexistence-with-Connectivity-Software-solved/m-p/685598#M3217 <HTML><HEAD></HEAD><BODY><P>Problem solved. After debugging I found that Keyboard Module was enabled and was causing conflict&nbsp;with pin used by ADC.</P><P></P><P>Hi All,</P><P></P><P>I don't see ADC driver in Connectivity Software so I try to configure ADC from example located &nbsp;in \frdmkw41z\demo_apps\dac_adc folder.&nbsp;</P><P>I use&nbsp;ADC0_IRQHandler to obtain converted value. First conversion usually is OK, but second causes reset KW41Z.&nbsp;</P><P>How to properly handle adc irq?</P><P></P><P>Best Regads,</P><P>Lukasz</P></BODY></HTML> Thu, 27 Jul 2017 10:30:53 GMT https://community.nxp.com/t5/Wireless-MCU/ADC-coexistence-with-Connectivity-Software-solved/m-p/685598#M3217 lukaszgesieniec 2017-07-27T10:30:53Z