How to verification the uart's RTS/CTS can work use KW41Z on MCUXpresso？

danieltseng — Mon, 17 Jul 2017 02:26:36 GMT

KW41Z's SDK_2.2_FRDM-KW41Z which has example and driver .
Uart only supported by the software program TX / RX, and does not support the CTS/RTS function.
I needs to verify that the CTS/RTS on the hardware is working properly.
I found the simplest uart program (lpuart --> polling).
To ask how to modify the UART can be verified CTS and RTS hardware wiring can work properly？

【 frdmkw41z_driver_examples_lpuart_polling 】

SW modifications:

board/pin_mux.c

void BOARD_InitLPUART(void) {

CLOCK_EnableClock(kCLOCK_PortC);

PORT_SetPinMux(PORTC, PIN4_IDX, kPORT_MuxAlt4); /* PORTC4 (pin 40) is UART0_RTS PTC4 */

PORT_SetPinMux(PORTC, PIN5_IDX, kPORT_MuxAlt4); /* PORTC5 (pin 41) is UART0_CTS PTC5 */

PORT_SetPinMux(PORTC, PIN6_IDX, kPORT_MuxAlt4); /* PORTC6 (pin 42) is UART0_RX */

PORT_SetPinMux(PORTC, PIN7_IDX, kPORT_MuxAlt4); /* PORTC7 (pin 43) is UART0_TX */

Re: How to verification the uart's RTS/CTS can work use KW41Z on MCUXpresso？

gerardo_rodriguez — Tue, 01 Aug 2017 01:03:56 GMT

Hello Daniel,

As you noticed, hardware flow control is not supported in the KSDK 2.2 drivers for the LPUART. However, this will be supported on the next version of the KSDK.

The hardware flow control in the LPUART module is configured through the LPUARTx_MODIR register. Please refer to chapter 38.2.6 LPUART Modem IrDA Register in the reference manual for information on this functionality.

Regards,
Gerardo

topic How to verification the uart's RTS/CTS can work use KW41Z on MCUXpresso？ in Wireless MCU

How to verification the uart's RTS/CTS can work use KW41Z on MCUXpresso？

Re: How to verification the uart's RTS/CTS can work use KW41Z on MCUXpresso？