Wireless MCUのトピックRe: Problems setting up Beyondstudio for NXP IDE

Problems setting up Beyondstudio for NXP IDE

martinpannenbae — Thu, 01 Jun 2017 13:30:02 GMT

Hello,

I'm new to developing ZigBee Applications and already get stuck with setting up the IDE. I have JN5168-M00 module and want to start programming with the JN-AN-1217-Zigbee-3-0-Base-Device Demo.

I installed the IDE as explained in JN-UG-3098 with BeyondStudio for NXP first, then the JN-SW-4170 Zigbee 3.0 SDK and installed the ZigBee Plugins. So far, so good.

After importing the Demo Project and trying to compile, I get a lot of symbol could not be resolved errors.

To solve this problem I right clicked on the Project, chose Properties and then added the include files manually like shown in this picture:

Many Errors vanished, but some are still there as shown here

As I don't know if I'm on the right way to solve the Errors I want to ask here for some help.

Would be great if someone here can help me.

With best regards

Martin Pannenbäcker

Re: Problems setting up Beyondstudio for NXP IDE

mario_castaneda — Mon, 03 Jul 2017 17:03:04 GMT

Hi Martin,

Could you please check were you put the application?

Please check the workspace directory of beyond studio to "C:\nxp\bstudio_nxp\workspace"

When trying to find the "sdk/JN-SW-4168/Stack/Common/Build/config.mk" file, it is using relative path to get to it assuming that it is in the correct directory.

The errors you are seeing in Eclipse are due to the indexer.

It sometimes resolves itself if you rebuild the indexer by

right clicking on the project -> Index -> refresh all files

then

right clicking on the project -> Index -> Rebuild

The errors you are seeing is Eclipse not being able to resolve various variable and functions within the SDK.

Also, please check the console if the example compile or not.

Best Regards,

Mario

Re: Problems setting up Beyondstudio for NXP IDE

dheerajsawant — Mon, 21 Aug 2017 13:12:57 GMT

Hello Sir,

@ Martin Pannenbaecker have you solve your problem?

i am from INDIA, even i am facing same problem.

every time i try to import code from application like example (jn-an1162) its give me error. i dont understand how to remove this error and its missing some library files like jendefs.h and AppHardawareApi.h like so many header files are absent which are included in all programs.

please help me.

(sorry for English)**

Re: Problems setting up Beyondstudio for NXP IDE

mario_castaneda — Mon, 21 Aug 2017 18:48:40 GMT

Hi Dheeraj,

Could you please take a screen to the console?

The errors you are seeing is Eclipse not being able to resolve various variable and functions within the SDK.

Let me know your findings.

Regards,

Mario

Re: Problems setting up Beyondstudio for NXP IDE

dheerajsawant — Tue, 22 Aug 2017 10:25:17 GMT

Hello Mario Ignacio Castaneda Lopez,

Hello sir,

please check attached file.

i did index and rebuild as you say.

but still i am facing same problem.

my workspace is c drive location.

i am stuck at this point.

i have purchase this module and PCB Board is almost ready.

i don't know what should i do?

Thank you for your time.

Re: Problems setting up Beyondstudio for NXP IDE

mario_castaneda — Tue, 22 Aug 2017 17:01:55 GMT

Hi Dheeraj,

The errors you are seeing is Eclipse not being able to resolve various variable and functions within the SDK.

But what is the application note that you can compile?

Also, where is folder that you saved the app note?

It should be in the nect location C:\nxp\bstudio_nxp\workspace

Best Regards,

Mario

Re: Problems setting up Beyondstudio for NXP IDE

dheerajsawant — Tue, 22 Aug 2017 18:25:41 GMT

Hello sir,

Thank you for your reply.

I have use JN-AN 1162 application note .

And my project directory is different .

Ok tomorrow in office I will make it same directory .

As c drive thank you for this. I was not aware of this.

But sir there are missing libraries.

Like jendef.h and apphardwareapi.h and os.h, bgm.h so many what should I do.

And have u seen that uint32/8/64 errors why it's are all coming...is this because of directory*

Thank you for ur time.

Re: Problems setting up Beyondstudio for NXP IDE

mario_castaneda — Tue, 22 Aug 2017 23:27:20 GMT

Hi Dheeraj

When you are compiling an application note, the Beyond Studio takes all that libraries and generates the .bin file. Unfortunately, the errors that you are seeing, The IDE can't link the libraries with the c files correctly, but you can compile without any problems.

Sorry for any inconvenience.

Best Regards,

Mario

Re: Problems setting up Beyondstudio for NXP IDE

dheerajsawant — Wed, 23 Aug 2017 09:17:46 GMT

Hello Mario Ignacio Castaneda Lopez,

Thank You for your time.

now i have resolve all issue and error.

i resolve those issue by installing SDK of 4168.

but last error is remaining. i have take screen shot please check it.

I think that issue is not regarding example/applicatoin, i think i am doing mistake in beyond studio setting.

please check screen shot and give me right direction.

Thank You for your reply and your time

Thank You very much

Dheeraj Sawant

Re: Problems setting up Beyondstudio for NXP IDE

mario_castaneda — Fri, 25 Aug 2017 21:23:34 GMT

Hi Dheeraj,

It will be nice, if you can tell me what is this Application note that are working on.

Best Regards,

Mario

Re: Problems setting up Beyondstudio for NXP IDE

dheerajsawant — Sat, 26 Aug 2017 05:39:12 GMT

Hello Mario,

our main application is related to RF based(we have to send temp reading from one module to another module). But in our office no one used beyond studio or eclipse yet.

so i am going to familiar with this studio(Beyond Studio).

so just for an example i am trying to compile 2 - 3 application. so right now i am compiling

"JN-AN-1162-JenNet-IP-Smart-Home" based application.

i request you, if you have any example/Application which i can directly import and compile(without error and with bin file to upload on controller), then please provide me.

Thank You for your time.

Re: Problems setting up Beyondstudio for NXP IDE

dheerajsawant — Sat, 26 Aug 2017 06:41:44 GMT

Hello Mario Ignacio Castaneda Lopez,

Thank You for your time.

i am trying to compile JN-AN-1162 application.

in that Common -->Source-->uart.c

This application i am trying to compile.

Re: Problems setting up Beyondstudio for NXP IDE

mario_castaneda — Fri, 01 Sep 2017 01:13:40 GMT

Hi Dheeraj,

Do you still have problems with this AN?

Best Regards,

Mario

Re: Problems setting up Beyondstudio for NXP IDE

dheerajsawant — Fri, 01 Sep 2017 05:14:15 GMT

Hello @Mario Ignacio Castaneda Lopez ,

Yes Problem is solved.

Binary files are created by building project but error are occurring.

No there is no problem with "AN".

Sir i have another question can i get your help regarding RF communication between two JN5168 Module.

i need some information about it and if there are sample program for this communication.

Even i have created another topic.

Thank You for your time.

Re: Problems setting up Beyondstudio for NXP IDE

dheerajsawant — Tue, 05 Sep 2017 11:46:52 GMT

Hello mario_castaneda‌,

i am facing a problem .

not able to upload code in Jn5168 module.

i have attached screen shot showing error that "Failed to read chip details".

Connection is "system--Moxa cable--interfacing board(RS232)--jn5168 Module board"

Thank You for your time.

Re: Problems setting up Beyondstudio for NXP IDE

dheerajsawant — Tue, 05 Sep 2017 12:38:15 GMT

Hello,

I think Beyond studio is not detecting Moxa cable which is usb to serial converter.

when i connect only moxa cable to system and try to check program device on Beyond studio then its started to show this error.

is there any solution?

Thank you for your time.

Re: Problems setting up Beyondstudio for NXP IDE

mario_castaneda — Tue, 05 Sep 2017 21:20:04 GMT

Hi Dheeraj,

Are you using the expansion boards or is a custom board?

Best Regards,

Mario

Re: Problems setting up Beyondstudio for NXP IDE

davidashraf — Tue, 05 Sep 2017 21:27:49 GMT

This error means either there's a problem in your connections to the module or a problem with USB driver
If you're sure of the drivers then check your connections
In programming mode The connection should be :
Tx -> Rx
Rx -> Tx
VDD -> 3.3v
GND -> 0v
SPIMISO -> GND

Notes:
-IF you're using another source of power other than USB then make sure both grounds are connected
-After making these connections reset the module by putting RESET pin -> GND then move it back to -> VDD
-Make Sure you're using UART0

Regards

Re: Problems setting up Beyondstudio for NXP IDE

dheerajsawant — Wed, 06 Sep 2017 11:54:36 GMT

Hello mario_castaneda‌,

Yes i am using custom board and usb to uart is also custom board i am using and its work perfectly.

Thank You

Re: Problems setting up Beyondstudio for NXP IDE

dheerajsawant — Wed, 06 Sep 2017 12:08:51 GMT

Hello davidashraf‌,

yes connection is same as tx-rs and likewise.

Ground is common.

RESET pin -> GND then move it back to -> VDD ---its also done

using UART0(DIO9-10)pin of Jn5168 Module.

SPIMISO -> GND--------done

but still showing same error.