Wireless MCUのトピックRe: JN5179 Read Binding Table

JN5179 Read Binding Table

jainilshah — Tue, 21 Feb 2017 15:19:37 GMT

Hi All,

We are working with NXP JN5179 DK0005 devkit for one of our projects.

We are having some problems while reading end Device Binding table(E.g. switch) from Coordinator. We are using "DR1175 LED Bulb Device" and "DR1199 Dimmer Switch Device" that comes along with Dev Kit for the Binding experiments and ZGWUI (Windows GUI Tool) for issuing Binding command to Coordinator.

Can you please let me know how to read end device binding table from Coordinator?

Thanks in Advance!

Re: JN5179 Read Binding Table

saleem_kala-janssen — Thu, 09 Mar 2017 01:35:52 GMT

Hi marjohloo‌,

can you please have a look at this?

Thanks.

Saleem

FYI: steverymer‌

Re: JN5179 Read Binding Table

marjohloo — Thu, 09 Mar 2017 11:22:23 GMT

Hi Jainil,

The ZGWUI interface doesn't currently support the remote reading of the binding table from a device.

However the ZPS_eAplZdpMgmtBindRequest() function in our stack can be used to read the table from a remote device. Further details on this function are in JN-UG-3113 ZigBee 3.0 Stack User Guide from ZigBee 3.0|NXP .

Regards, Martin.

Re: JN5179 Read Binding Table

wupengfei — Mon, 18 Sep 2017 01:55:15 GMT

Can you tell me how JN5179 is going into programming mode? I follow the instructions of the technician SPIMIMO-> GND，RESET-GND,VDD->3.3V still can not recognize the JN5179 device. Thank you.

Re: JN5179 Read Binding Table

saleem_kala-janssen — Mon, 18 Sep 2017 16:47:19 GMT

Hi MattGillespie‌,

can you please support this request?

Thanks.

Saleem

Re: JN5179 Read Binding Table

MattGillespie — Tue, 19 Sep 2017 08:08:41 GMT

All of the JN devices require DO1/SPIMISO to be low when RESETN is released. See the image below. Reset must be released so that the CPU can start running. It will then start running an application in the bootloader that lets you program the internal flash memory over the UART.

Re: JN5179 Read Binding Table

wupengfei — Wed, 20 Sep 2017 02:32:18 GMT

I make it success. thanks for your help.