Wireless MCU中的主题 Re: Rigado R41Z debug problem

Rigado R41Z debug problem

wojtek_84 — Wed, 29 Mar 2017 07:19:55 GMT

Hello,

I have Rigado R41Z development kit which is based on KW41Z. I have problems with running BLE examples from Kinetis KW41Z Connectivity Software under KDS 3.2. I can debug all driver examples and demo apps (e.g. bubble) but when I try to start debug session for BLE example (e.g. beacon) I get an error:

Error in final launch sequence
Failed to execute MI command:
-exec-run

Flashing works fine. Jlink is recognizing the boeard correctly.

I compered the debug configuration but I connt see any difference between BLE and none BLE examples.

I would appreciate any help.

Regards.

Re: Rigado R41Z debug problem

pavel_krenek — Fri, 31 Mar 2017 10:24:22 GMT

Hi Wojciech,

first you would check low power mode settings. It looks after the programming the mcu goes to sleep mode and disconnect the debugger.

Best regards,

Pavel

Re: Rigado R41Z debug problem

msjadem — Wed, 12 Apr 2017 21:59:53 GMT

Wojciech,

We noticed the same issue here at Rigado.

Make sure to check for updates in KDS. If you receive an error like " Unable to read repository at https://gnuarmeclipse.sourceforge.net/updates/content.xml", you can still download that repository in a zip file and manually update.

Regards,

Kyla Marino

Rigado Support Engineer