topic Re: RW610 PowerTableUtil.exe missing utility in Wireless MCU

RW610 PowerTableUtil.exe missing utility

allenandrew1357 — Wed, 30 Sep 2026 18:40:15 GMT

Hello, I'm looking for the PowerTableUtil.exe file referenced in the UM12154 document. I was able to find the sample power table spreadsheets but not the tool itself. Apparently it's supposed to be on the RW610 product page but I cannot find it there. Any help would be greatly appreciated

Re: RW610 PowerTableUtil.exe missing utility

Habib_MS — Thu, 01 Oct 2026 22:54:25 GMT

Hello @allenandrew1357,

You can find the PowerTableUtil.exe utility in the Secure Software section of the device's official product page:

Could you please help us confirm that you have access to this section?

You would need to request access through Secure Access Rights by following the instructions from this page: Secure Access Rights | NXP Semiconductors

Habib

Re: RW610 PowerTableUtil.exe missing utility

allenandrew1357 — Fri, 02 Oct 2026 14:37:48 GMT

I took a look at the secure section, seems like I have not requested access rights yet. I put in the request, I'll update once that goes through. Thanks!

Re: RW610 PowerTableUtil.exe missing utility

allenandrew1357 — Mon, 05 Oct 2026 16:04:16 GMT

I requested secure access rights. They were approved this morning. Still, when clicking on the Secure software section, there are zero available results. The page says "There is no information to display". Any suggestions on what to do from here? Does the file exist on your end?

Re: RW610 PowerTableUtil.exe missing utility

Habib_MS — Tue, 06 Oct 2026 20:29:09 GMT

Hi @allenandrew1357,

For further details regarding this process, please refer to the Secure Access Rights FAQs.

BR
Habib

Re: RW610 PowerTableUtil.exe missing utility

allenandrew1357 — Tue, 06 Oct 2026 21:11:32 GMT

Ok but I already have secure access rights. See the attached screenshot. I even confirmed that the RW610 page is included in that "List of Products with Authorized Access Rights" section. Still, I see that there are 0 secure software packages there. My concern is that the PowerTableUtil.exe file isn't actually linked in the software section. There was another forum post detailing the same issue, but the resolution happened in a private DM with the NXP employee. Could you please look into this further?

Re: RW610 PowerTableUtil.exe missing utility

Habib_MS — Wed, 07 Oct 2026 22:10:50 GMT

Hello @allenandrew1357,

Could you please assist us in contacting your distributor or sales representative to obtain access to this file?

I apologize for the inconvenience this may cause.

BR
Habib