topic Re: NXP(CTN730) Programmer model recommendation in Wireless MCU

NXP(CTN730) Programmer model recommendation

greenyang — Wed, 19 Nov 2025 06:56:49 GMT

We currently have a requirement to program the NXP CTN730 microcontroller using the J-Link protocol. Could you please recommend a suitable programmer model from NXP for this purpose?

Does MCU-Link Pro support this? If can, could share some information about the configuration of it. We need to buy the programmer.

Another question, we need to do parallel firmware download. Please also advice us how to do this.

Look forwards your replys.

Thanks.

Green Yang

Re: NXP(CTN730) Programmer model recommendation

KaiLi — Wed, 19 Nov 2025 07:43:12 GMT

Hello @greenyang

All of design resources related WLC are security files, so please register account using your company's email address, and then sign an NDA with NXP.

Re: NXP(CTN730) Programmer model recommendation

KaiLi — Wed, 19 Nov 2025 07:45:49 GMT

Hello @greenyang

LPC-Link2 or MCU-Link Pro supports CTN730.

Re: NXP(CTN730) Programmer model recommendation

greenyang — Wed, 19 Nov 2025 07:49:03 GMT

Ok, so i need to resign the account with company's email. Right?

Re: NXP(CTN730) Programmer model recommendation

greenyangMY — Wed, 19 Nov 2025 08:16:19 GMT

Hi KaiLi,

I am green. From you reply that we can download firmware use MCU-Link Pro. Could you send me the design resources about this.

I need the order configuration list of MCU-Link Pro. Please note that we need to use J-Link to download firmware into NXP CTN730.

Thanks.

Green