Wireless MCUのトピックRe: How to Access SimpleMetering Cluster from Home Automation

How to Access SimpleMetering Cluster from Home Automation

tom_jacobson — Thu, 02 Mar 2017 19:59:58 GMT

I'd like my Home Automation Coordinator to send a ReadAttributesRequest to my SmartPlug devices, requesting the SimpleMetering cluster. Using the coordinator in the HA demo (JN-AN-1189), I've done a few modifications, trying to add the SimpleMetering cluster to the HA profile, then add the cluster to End Point 1 on the coordinator. Unfortunately, this causes the ZigBee module (JN5168) to crash and restart.

Can someone point me in the right direction of accessing the SimpleMetering cluster? It is a Smart Energy cluster, but it goes into Smart Plugs, which are a Home Automation device, so I assume it can be accessed somehow.

- Thomas

Re: How to Access SimpleMetering Cluster from Home Automation

mario_castaneda — Tue, 04 Apr 2017 20:41:07 GMT

Hi Tomas,

Could you please take a look the next post, this will help you to add a new cluster, like SimpleMetering.

https://community.nxp.com/thread/437604

Hope it helps.

Best Regards,

Mario

Re: How to Access SimpleMetering Cluster from Home Automation

tom_jacobson — Mon, 17 Apr 2017 19:14:47 GMT

Thanks for the response, Mario. It turned out that I needed to register a few things I didn't realize needed registration (including the SimpleMetering cluster).