topic Re: Help with JN5168 configuration in Wireless MCU

Help with JN5168 configuration

fredfred — Fri, 14 Apr 2017 19:51:50 GMT

Hi,

I bought some JN5168 modules, downloaded the jn5168 datasheet and the flash programmer software.
I want to configure my modules as coordinator for one and as end-devices for others but i don't know how to do this (the datasheet do not explain the procedure).

Can someone help me ?

Thank's!

Re: Help with JN5168 configuration

mario_castaneda — Thu, 20 Apr 2017 19:24:23 GMT

Hi Fred,

The “BeyondStudio for NXP” Integrated Development Environment (IDE) provides a platform for the development of wireless network applications to be run on NXP’s JN516x family of wireless microcontrollers. You can find it downloading the SW.

Also, please take a look to the BeyondStudio for NXP Installation and User Guide. JN-UG-3098

http://www.nxp.com/documents/user_manual/JN-UG-3098.pdf

JN-SW-4141 IEEE 802.15.4 for JN516x and JN517x|NXP

Then, you have to download an SDK, it will depend you final application. For example the JN-SW-4163, it will support the IEEE 802.15.4 examples.

The JN-AN-1180 application is a good example for getting started. The process to how install the IDE,SDK and import a project are described in the JN-UG-3098 user guide.

Hope it hepls,

Mario

Re: Help with JN5168 configuration

fredfred — Sat, 22 Apr 2017 09:31:50 GMT

Yes it help me a lot.

thank you.