Wireless MCUのトピックJN5168 beyondstudio errors

JN5168 beyondstudio errors

leiyang — Wed, 14 Dec 2016 12:25:48 GMT

There always having errors "program gcc not found in the path" in the program views, I try some methods like setting the system variables and beyongstudio varibales, but these errors is existing. what should I dou ? Please neglect the bad English. thanks

Re: JN5168 beyondstudio errors

mario_castaneda — Thu, 05 Jan 2017 21:27:14 GMT

Hi Lei Yang,

Which SDK you are using?
Which version of the SDK you are using?
Which version of the application note you are using?

Best Regards,

Mario

Re: JN5168 beyondstudio errors

mario_castaneda — Tue, 10 Jan 2017 20:54:15 GMT

Hi Lei Yang,

Could you please share the screenshot of the contents of the JN-AN-1217 and JN-SW-4170 folders as I've shown below, ensuring that they have clicked in the address bar at the top of Windows Explorer so I can see the path on their computer:

Best Regards,

Mario

Re: JN5168 beyondstudio errors

leiyang — Wed, 11 Jan 2017 01:58:44 GMT

Hi, Mario,

The problem has been solved. I reinstalled the beyondstuido again and just add the 'chip','common','components' and 'stack' folders to the project from 'JN-SW-4170' folder. Then building was successful. But I don't sure whether it was an approprate way to solve the problem. The screenshot in my computer as follows:

Finally, thank for your reply!

Best regards,

Lei Yang

Re: JN5168 beyondstudio errors

mario_castaneda — Fri, 13 Jan 2017 20:33:32 GMT

Hi Lei Yang,

The expected way is to:

1. Install JN-SW-4141 which installs mainly the IDE

2. Install JN-SW-4170 which should install into the C:/NXP/bstudio_nxp/sdk/JN-SW-4170, this should include the Chip, Components etc folders.

If files have been manually copied we can't be confident in what you are running to provide appropriate assistance.

Best Regards,

Mario

Re: JN5168 beyondstudio errors

leiyang — Mon, 27 Feb 2017 08:35:35 GMT

Hi Mario,

These days, I learn the JN5168 accroding to the reference paper. Here, I have question about DEBUG model. According to the "JN-UG-3075 JenOS User Guide" , we can enable the DEBUG model by adding -DDBG_ENABLE to the compiler. I can't find the 'compiler' in the BeyondStudio. the 'compiler' is a file or a setting?

Thank you !

Best Regards,

Lei

Re: JN5168 beyondstudio errors

mario_castaneda — Mon, 27 Feb 2017 17:51:57 GMT

Hi Lei Yang,

Please see the Makefile, for example take a look to the next path:

C:\NXP\bstudio_nxp\workspace\JN-AN-1189-ZigBee-HA-Demo\Coordinator\Build

Also for a better reference you can take a look to the JN516x JTAG Debugging in BeyondStudio

http://www.nxp.com/documents/application_note/JN-AN-1203.pdf

Best Regards,

Mario

Re: JN5168 beyondstudio errors

leiyang — Fri, 24 Mar 2017 03:40:39 GMT

Hi Mario,

I met some difficulties in JN5168 again. Now, I am simulating an IIC sequence through IO, but the delay function that I write was not work. The code is showed in figure 1. Can you give me some idea about this?

In the code, I just want to detect the delay time of function. However, the pulse interval is same, is about 600ns.

Thanks,

Best Regards

Lei

Re: JN5168 beyondstudio errors

mario_castaneda — Thu, 30 Mar 2017 15:49:26 GMT

Hi Lei Yang,

Please check the Clock configuration, bool_t bAHI_GetClkSource(void); You should know what is the frecuency that your application is running.

The time delay is very low and you can't see that different.

Best Regards,

Mario

Re: JN5168 beyondstudio errors

leiyang — Mon, 17 Apr 2017 09:32:47 GMT

Hi Mario,

I encoutner another problem. In my project, I need use more DIO and I found I can not control some DIO, like DIO4, DIO5, DIO6, DIO7, DIO18, DIO19, DIO20. These PINs keep fixed level, whether I change their status.

See relevant manual, I found these PINs were designed to other functions, as DIO4, DIO5, DIO6 adn DIO7 were about JTAG.

How I can disable the JTAG function and control relevant PINs?

Best Regards

Lei

Re: JN5168 beyondstudio errors

mario_castaneda — Wed, 19 Apr 2017 00:17:09 GMT

Hi Lei Yang,

As you can see, the JN-AN-1189 has a buttonInitialise function.

When a peripheral is enabled, it takes control over the device pins allocated to it.

Hope it helps.

Best Regards,

Mario